HSMindex

(was) HSMINDEX.WK1	PRINT AS DUTCH 8 PT
AUGUST 8, 1998	READ AS SWISS 12 PT
HARDBOUND BOOKS & MAGAZINES

PAGE		BOOK	AUTHOR	SUBJECT1	SUBJECT2	SUBJECT3	YEAR	MONTH

	EDM MACHINE, COMPLETE SERIES	EDM BOOK	LANGLOIS, R.R.	EDM 1	BUILDING	SERIES
48	LATHE DOGS	HSM 9109	KOUHOUPT, RUDY	LATHE	DOGS	BUILDING	91	109
52	COMPUTERS IN THE SHOP (CNC) PART 3	HSM 9109	FRIESTAD, ROLAND	MILL	CONVERSION	CNC	91	109
55	TOGGLES AND CLAMPS	HSM 9109	HOFFMAN, E.G.	SHOP	CLAMPS	TOGGLES	91	109
44	INJECTION MACHINE, PLASTIC PART 3	HSM 9109	HANSON, RODNEY W.	SHOP	INJECTION	PLASTIC	91	109
32	UNIVERSAL PILLAR TOOL PART 5	HSM 9109	MASON, H.	SHOP	PILLAR TOOL	BUILDING	91	109
20	TOPSY-TURVY ENGINE PART 1	HSM 9109	DUCLOS, PHILIP	ENGINE	HIT 'N MISS AO	GAS	91	109
17	GEOMETRIC CONSTRUCTION	HSM 9109	HOFFMAN, E.G.	SHOP	CALCULATIONS	GEOMETRIC	91	109
40	CLOCK, FREE PENDULUM PART 4	HSM 9109	BOUCHERON, PIERRE	HOBBY	CLOCK	PENDULUM	91	109
52	COMPUTERS IN THE SHOP (CNC) PART 3	HSM 9109	FRIESTAD, ROLAND	CNC8	MILL	CONVERSION	91	109
15	PARALLELS, UNTRA-THIN (REVIEW)	HSM 9109	LAUTARD, GUY	MILL	PARALLEL	UNLTRA THIN	91	109
41	CRUSHER, CAN.	HSM 9111	MARUSCHAK	PROJECT	CRUSHER	CAN	91	111
18	VISE FOR MILLING MACHINE	HSM 9111	KOUHOUPT, RUDY	MILL	VISE		91	111
44	COMPUTERS IN THE SHOP (CNC) PART 4	HSM 9111	FRIESTAD, ROLAND	CNC5	MILL	CONVERSION	91	111
43	MAGNETIC V-BLOCKS (REVIEW)	HSM 9111	LAUTARD, GUY	SHOP	V-BLOCK	MAGNETIC	91	111
37	DIAL INDICATORS-DTI	HSM 9111	GASCOYNE, J.B.	SHOP	INDICATOR	DTI	91	111
32	INJECTION MACHINE, PLASTIC PART 4	HSM 9111	HANSON, RODNEY W.	SHOP	INJECTION	PLASTIC	91	111
48	CLAMPS, MILLING	HSM 9111	KOUHOUPT, RUDY	MILL	CLAMPS	PROJECT	91	111
54	CLAMPS, CAM0	HSM 9111	HOFFMAN, E.G.	MILL	CLAMPS		91	111
27	TOPSY-TURVY ENGINE PART 2	HSM 9111	DUCLOS, PHILIP	ENGINE	HIT 'N MISS AP	GAS	91	111
15	GEOMETRIC CONSTRUCTION	HSM 9111	HOFFMAN, E.G.	SHOP	CALCULATIONS	GEOMETRIC	91	111
51	END MILL ARBOR	HSM 9111	MCLEAN, FRANK	MILL	ARBOR PRESS	ENDMILL	91	111
40	STORAGE	HSM 9111	VREELAND, D.	SHOP	STORAGE		91	111
45	COMPUTERS IN THE SHOP (CNC) PART 5	HSM 9201	FRIESTAD, ROLAND	CNC6	MILL	CONVERSION	92	101
32	ROTARY TABLE	HSM 9201	HOFF, M.	MILL	ROTARY	TABLE	92	102
24	TOPSY-TURVY ENGINE PART 3	HSM 9201	DUCLOS, PHILIP	ENGINE	HIT 'N MISS AQ	GAS	92	102
45	COMPUTERS IN THE SHOP (CNC) PART 6	HSM 9203	FRIESTAD, ROLAND	CNC7	MILL	CONVERSION	92	103
29	TOPSY-TURVY ENGINE PART 4	HSM 9203	DUCLOS, PHILIP	ENGINE	HIT 'N MISS AR	GAS	92	103
53	POWER FEED FOR MILL/DRILL	HSM 9203	KALB, M.E.	MILL	POWER FEED	TABLE	92	103
32	TOPSY-TURVY ENGINE PART 5	HSM 9205	DUCLOS, PHILIP	ENGINE	HIT 'N MISS AS	GAS	92	105
14	CAD FOR SMALL SHOP	HSM 9207	HOFFMAN, E.G.	SHOP	DRAFTING	TABLE	92	107
52	COMPUTERS IN THE SHOP (CNC) PART 1	HSM 9209	FRIESTAD, ROLAND	CNC	CONTROLLER	CONTROLS	92	111
42	CYLINDRICAL SQUARE	HSM 9211	MCLEAN, FRANK	SHOP	SQUARE	CYLINDRICAL	92	111
18	THREAD TOOLING	HSM 9211	JOHNSON, D.E.	LATHE	THREADING	TOOLING	92	111
39	CUTTING HOLES, IRREGULAR SHAPED	HSM 9211	ROSCOE, L. L.	SHOP	HOLES	CUTTING	92	111
51	COMPUTERS IN THE SHOP (CNC) PART 2	HSM 9211	FRIESTAD, ROLAND	CNC	CONTROLLER	CONTROLS	92	111
42	CYLINDRICAL SQUARE	HSM 9211	MCLEAN, FRANK	SHOP	LAYOUT	TOOLING	92	111
16	MEASURING WITH PINS	HSM 9211	HOFFMAN, E.G.	SHOP	LAYOUT	MEASURING	92	111
18	WIGGLER	HSM 9211	JOHNSON, D.E.	LATHE	WIGGLER	TOOLING	92	111
46	TINY ENGINES	HSM 9211	KOUHOUPT, RUDY	ENGINE	HOW TO DO IT	TOOLING	92	111
57	THREAD CUTTING AIDS	HSM 9211	BROWN, K. R.	SHOP	THREADING	AID	92	111
54	VISE JAW FIXTURES	HSM 9211	HOFFMAN, E.G.	SHOP	TOOLING	VISE	92	111
34	CLAMPING DEVICES	HSM 9211	HOFFMAN, E.G.	SHOP	CLAMPING	TOOLING	92	111
40	BASEMENT RUST	HSM 9211	AMBROSINO, M. M.	SHOP	RUST PROTECTION	TOOLING	92	111
24	STARTING TURNING, PART 4, CANDLESTICKS	HSM 9211	MASON, A.	LATHE	TECHNIQUE	CANDLESTICKS	92	111
26	ALUMINUM FUNDEMENTALS	HSM 9301	GENEVRO, G.W.	SHOP	METAL	ALUMINUM	93	101
54	COMPUTERS IN THE SHOP (CNC) PART 3	HSM 9301	FRIESTAD, ROLAND	CNC	CONTROLLER	CONTROLS	93	101
46	TAILSTOCK ATTACHMENTS	HSM 9301	MCLEAN, FRANK	LATHE	TAILSTOCK	TOOLING	93	101
31	CUT-OFF TOOL FROM A SAW BLADE	HSM 9301	HUARD, C.	LATHE	CUT-OFF	TOOLING	93	101
38	BORING BARS	HSM 9301	STRAIGHT, J.W.	LATHE	BORING BAR	TOOLING	93	101
49	X AND Y STOPS FOR A MILL	HSM 9301	KOUHOUPT, RUDY	MILL	X Y STOPS	TOOLING	93	101
39	GRIZZLY 8 X 18 LATHE	HSM 9301	SCHULTZ. G.	LATHE	REVIEW	TOOLING	93	101
16	MEASURING WITH PINS	HSM 9301	HOFFMAN, E.G.	LATHE	LAYOUT	MEASURING	93	101
32	PIN PUNCH MAKING	HSM 9301	ACKER, STEVE	SHOP	PIN PUNCHES	TOOLING	93	101
18	THREAD CUTTING ON THE LATHE	HSM 9301	KOUHOUPT, RUDY	LATHE	THREADING	TOOLING	93	101
52	VISE JAW FIXTURES	HSM 9301	HOFFMAN, E.G.	SHOP	TOOLING	VISE	93	101
36	TAILSTOCK ATTACHMENTS	HSM 9303	MCLEAN, FRANK	LATHE	TAILSTOCK	TOOLING	93	103
28	SPINDLE LOCK FOR MILL/DRILL	HSM 9303	LOWERY, B.	MILL	LOCK	TOOLING	93	103
30	ALUMINUM FUNDEMENTALS	HSM 9303	GENEVRO, G.W.	SHOP	METAL	ALUMINUM	93	103
44	COMPUTERS IN THE SHOP (CNC)	HSM 9303	FRIESTAD, ROLAND	CNC9	SOMETHING DIFFERENT	CONTROLS	93	103
14	BUTLER BORING MACHINES	HSM 9303	MASON, H.	SHOP	BORING	INTEREST	93	103
39	CHUCK HANDLES - DRILL PRESS	HSM 9303	KOUHOUPT, RUDY	DRILL	CHUCK	HANDLES	93	103
48	TOOL BODIES	HSM 9303	HOFFMAN, E.G.	SHOP	TOOLING	TOOL BODIES	93	103
62	INDEX - 1992	HSM 9303	RICE, J. (EDITOR)	INDEX	1992	HSM	93	103
42	FILE CLEANER	HSM 9303	ACKER, STEVE	SHOP	FILES	CLEANER	93	103
24	MILLING MACHINE CONVERSION	HSM 9303	SHULL, L.	MILL	CONVERSION	INTEREST	93	103
46	TOOL BODIES	HSM 9305	HOFFMAN, E.G.	SHOP	TOOLING	TOOL BODIES	93	105
16	GEARLESS HIT-N-MISS ENGINE PART 1	HSM 9305	DUCLOS, PHILIP	ENGINE	HIT 'N MISS AA	GAS	93	105
12	V-BELT REPLACEMENT	HSM 9305	BUCCA, J. JR.	SHOP	V-BELT	REPLACEMENT	93	105
38	DRILL PRESS ROUTER ATTACHMENT	HSM 9305	MCLEAN, FRANK	DRILL	ROUTER	ATTACHMENT	93	105
36	VACUUM UP CHIPS	HSM 9305	DOUGHERTY	SHOP	VACUUM	CLEANUP	93	105
24	MILL/DRILL STAND (MOBILE)	HSM 9305	CARSON, S.W.	MILL	BASE	MOBILE	93	105
31	HYDRAULIC PRESS, BUILDING. PART 1	HSM 9305	ACKER, STEVE	SHOP	PRESS	HYDRAULIC	93	105
12	V-BELTS - LINKING	HSM 9305	BUCCA, J. JR.	LATHE	V-BELT	LINKING	93	105
24	MOBILIZE HEAVY TOOLS	HSM 9305	CARSON, S.W.	SHOP	BASE	MOBILE	93	105
37	KNOCKOUT BAR	HSM 9305	THOMPSON, J.R.	LATHE	KNOCKOUT	TOOLING	93	105
12	REPLACING V-BELT	HSM 9305	BUCCA, J. JR.	LATHE	V-BELT	REPLACEMENT	93	105
43	LATHE TABLE	HSM 9305	KOUHOUPT, RUDY	LATHE	STAND	CROSSFEED	93	105
13	EDGEFINDER	HSM 9305	CUTTRELL	MILL	EDGE FINDER	CONTROLS	93	105
48	COMPUTERS IN THE SHOP (CNC) PART 1	HSM 9305	FRIESTAD, ROLAND	CNC3	LATHE	CONVERSION	93	105
16	DIAMOND TOOLHOLDER (TANGENTIAL)	HSM 9307	KOUHOUPT, RUDY	LATHE	TOOLING	DIAMOND	93	107
43	HYDRAULIC PRESS, BUILDING. PART 2	HSM 9307	ACKER, STEVE	SHOP	PRESS	HYDRAULIC	93	107
34	OFFICE, HOME	HSM 9307	BATTERSBY, M. E.	SHOP	OFFICE	HOME	93	107
54	DRILL BUSHINGS. PART 1	HSM 9307	HOFFMAN, E.G.	DRILL	BUSHINGS 1	FIXTURES	93	107
18	TAP AND CLEARANCE DRILLS	HSM 9307	FORSLIND, S.R.	SHOP	DRILL SIZES	TAP	93	107
30	VERTICAL MILL SELECTION. PART 1	HSM 9307	HOWARD, T.F.	MILL	SELECTION 1	VERTICAL	93	107
36	TOOL POST SYSTEM, Q/C. PART 1	HSM 9307	TORGERSON, R.	LATHE 101	TOOL POST	QUICK CHANGE	93	107
52	ROUNDING THE ENDS	HSM 9307	MCLEAN, FRANK	MILL	TECHNIQUE	ROUNDING	93	107
48	V-NOTCHES, CUTTING	HSM 9307	BATTERSBY, M. E.	SHOP	CUTTING	V-NOTCHES	93	107
7	JACOBS REPAIR PARTS (#58B & 59B)	HSM 9307	GRAHAM, D.	LATHE	CHUCK	JACOBS 59B	93	107
49	CUT-OFF TOOL HOLDER	HSM 9307	KOUHOUPT, RUDY	LATHE	CUT-OFF	TOOLING	93	107
20	GEARLESS HIT-N-MISS ENGINE PART 2	HSM 9307	DUCLOS, PHILIP	ENGINE	HIT 'N MISS AB	GAS	93	107
39	TOOL POST SYSTEM, Q/C. PART 2	HSM 9309	TORGERSON, R.	LATHE 102	TOOL POST	QUICK CHANGE	93	109
49	COMPUTERS IN THE SHOP (CNC) PART 2	HSM 9309	FRIESTAD, ROLAND	CNC4	LATHE	CONVERSION	93	109
15	SIMPLE BROACH	HSM 9309	RULE, J.F.	SHOP	TECHNIQUE	BROACH	93	109
56	TOOLMAKER'S BUTTONS	HSM 9309	THOMSON, D.M.	MILL	TECHNIQUE	LOCATING	93	109
54	DRILL BUSHINGS. PART 2	HSM 9309	HOFFMAN, E.G.	DRILL	BUSHINGS 2	FIXTURES	93	109
14	V-BELTS - LINKING	HSM 9309	MYERS, B.	SHOP	V-BELTS	LINKED	93	109
26	VERTICAL MILL SELECTION. PART 2	HSM 9309	HOWARD, T.F.	MILL	SELECTION 2	VERTICAL	93	109
46	CUT-OFF TOOL, USING	HSM 9309	KOUHOUPT, RUDY	LATHE	CUTTOFF	CUT-OFF TOOL	93	109
56	BUSHING, THREADED	HSM 9309	THOMPSON, J.R.	DRILL	BUSHINGS	THREADED	93	109
30	STARTING TURNING, PART 5, ECCENTRICS	HSM 9309	MASON, A.	LATHE	TECHNIQUE	ECCENTRICS	93	109
18	GEARLESS HIT-N-MISS ENGINE PART 3	HSM 9309	DUCLOS, PHILIP	ENGINE	HIT 'N MISS AC	GAS	93	109
44	BAND SAW BLADE BRAZING	HSM 9309	MCLEAN, FRANK	SAW	BANDSAW	BLADE brazing	93	109
49	THREADING DIALS, METRIC CUTTING	HSM 9311	PETERSON, E.E.	LATHE	THREADING	METRIC	93	111
36	CERRO ALLOYS	HSM 9311	MCBRIDE, R.E.	SHOP	MACHINING	HOLDING	93	111
56	DRILL BUSHINGS. PART 3	HSM 9311	HOFFMAN, E.G.	DRILL	BUSHINGS 3	FIXTURES	93	111
39	TOOL POST SYSTEM, Q/C. PART 3	HSM 9311	TORGERSON, R.	LATHE 103	TOOL POST	QUICK CHANGE	93	111
51	CENTERFINDER, MAKING	HSM 9311	KOUHOUPT, RUDY	LATHE	CENTERFINDER	MAKING	93	111
54	HINGE CENTERING PUNCH	HSM 9311	MCLEAN, FRANK	SHOP	CENTERING PUNCH	MAKING	93	111
44	ENCO LATHE, 12X36	HSM 9311	LAWSON, C.E.R.	LATHE	REVIEW	ENCO	93	111
29	GEARLESS HIT-N-MISS ENGINE PART 4	HSM 9311	DUCLOS, PHILIP	ENGINE	HIT 'N MISS AD	GAS	94	111
22	SKELETON WALL CLOCK. PART 01	HSM 9311	SMITH, W.R.	HOBBY S01	CLOCK	SKELETON	93	111
29	SKELETON WALL CLOCK. PART 02	HSM 9401	SMITH, W.R.	HOBBY S02	CLOCK	SKELETON	94	101
22	STARTING TURNING, PART 5, ERRATA	HSM 9401	MASON, A.	LATHE	TECHNIQUE	ECCENTRICS	94	101
22	MILL SELECTION PART 2 ERRATA	HSM 9401	HOWARD, T.F.	MILL	SELECTION 2	VERTICAL	94	101
38	UNIMAT HEADSTOCK ADAPTER	HSM 9401	HUARD, C	LATHE	UNIMAT	HEADSTOCK	94	101
41	THREE PHASE CONVERTERS	HSM 9401	MATTHYS, R.J.	SHOP	CONVERTER	3 PHASE	94	101
40	FACING TO ACCURATE LENGTH	HSM 9401	MELTON, L	LATHE	FACEPLATE	TECHNIQUE	94	101
24	TOOL POST SYSTEM, Q/C. PART 4	HSM 9401	TORGERSON, R.	LATHE 104	TOOL POST	QUICK CHANGE	94	101
49	MILLING MACHINE ROUTER ATTACHMENT	HSM 9401	MCLEAN, FRANK	MILL	TECHNIQUE	ROUTER	94	101
36	BALANCE A GRINDER	HSM 9401	CHRISTOPHERSON, A. M.	GRINDER	BALANCING	WHEEL	94	101
46	BAND SAW BASE	HSM 9401	KOUHOUPT, RUDY	SAW	BANDSAW	BASE	94	101
44	DRILL BUSHINGS. PART 4	HSM 9401	HOFFMAN, E.G.	DRILL	BUSHINGS 4	FIXTURES	94	101
22	GEARLESS, PART 2, ERRATA	HSM 9401	DUCLOS, PHILIP	ENGINE	HIT 'N MISS AE	GAS	94	101
18	EASY CAD	HSM 9401	RICE, J. (EDITOR)	SHOP	CAD PROGRAM	EASYCAD	94	101
36	BALANCE A GRINDER	HSM 9401	CHRISTOPHERSON, A.M.	LATHE	BALANCE	WHEEL	94	101
52	COMPUTERS IN THE SHOP (CNC) PART 4	HSM 9401	FRIESTAD, ROLAND	CNC1	LATHE	CONVERSION	94	101
24	SKELETON WALL CLOCK. PART 03	HSM 9403	SMITH, W.R.	HOBBY S03	CLOCK	SKELETON	94	103
46	UNUSUAL TURNING	HSM 9403	MCLEAN, FRANK	LATHE	TURNING	UNUSUAL	94	103
52	SIMPLE TIMER	HSM 9403	REICHART, B	SHOP	TIMER	ELECTRIC	94	103
54	ARBOR PRESS RAM	HSM 9403	ANDREWS, A.	SHOP	ARBOR PRESS	RAM	94	103
48	SET BLOCKS	HSM 9403	HOFFMAN, E.G.	SHOP	FIXTURES	JIGS	94	103
30	N.A.M.E.S. 1993	HSM 9403	RICE, J. (EDITOR)	HOBBY	SHOW 1993	NAMES	94	103
62	INDEX - 1993	HSM 9403	RICE, J. (EDITOR)	INDEX	1993	HSM	94	103
20	TOOL POST GRINDER, BUILD & USE PART 1	HSM 9403	KOUHOUPT, RUDY	LATHE	GRINDER	TOOLPOST	94	103
55	BROKEN DRILLS	HSM 9403	VANVEGHEL, L.A.	SHOP	DRILLS	REPAIR	94	103
41	TURNING TAPES, MILL/DRILL	HSM 9403	THOMAS, S.M.	MILL	TURNING	TAPERS	94	103
34	TITAN .60. PART 1	HSM 9403	GENEVRO, G.W.	ENGINE A	AIRPLANE	TITAN .60	94	103
44	TUMBLER GEAR REVERSAL MECHANISM	HSM 9403	MYERS, T	LATHE	TUMBLER	REVERSE	94	103
36	KEYSEAT MILLING	HSM 9405	SMITH, W.R.	HOBBY	CLOCK	SKELETON	94	105
29	MILL/DRILL WALL SUPPORT	HSM 9405	HOLM, P.J.	SHOP	STAND	MILL/DRILL	94	105
52	TOOL POST GRINDER, BUILD & USE PART 2	HSM 9405	KOUHOUPT, RUDY	LATHE	GRINDER	TOOLPOST	94	105
58	KEYSEAT MILLING	HSM 9405	MCLEAN, FRANK	MILL	TECHNIQUE	KEYSEAT	94	105
20	SINGLE SHOT RIFLE. PART 1	HSM 9405	MUELLER, W.B.	HOBBY M1	RIFLE	SINGLESHOT	94	105
32	TITAN .60. PART 2	HSM 9405	GENEVRO, G.W.	ENGINE B	AIRPLANE	TITAN .60	94	105
44	ELECTRICAL DISCHARGE MACHINING	HSM 9405	LEWIS, J.	EDM	MORE		94	105
48	COMPUTERS IN THE SHOP (CNC) PART 4	HSM 9405	FRIESTAD, ROLAND	CNC2	LATHE	CONVERSION	94	105
56	WORKHOLDER DESIGN TIPS. PART 1	HSM 9405	HOFFMAN, E.G.	SHOP	WORKHOLDER	DESIGN	94	105
36	SKELETON WALL CLOCK. PART 04	HSM 9405	SMITH, W.R.	HOBBY S04	CLOCK	SKELETON	94	105
51	WORKHOLDER DESIGN TIPS. PART 2	HSM 9407	HOFFMAN, E.G.	SHOP	WORKHOLDER	DESIGN	94	107
44	SHAPER LARGE RADIUS CUTS	HSM 9407	HOIJER, P.J.	SHAPER	TECHNIQUE		94	107
56	PARTS SOURCES	HSM 9407	HONEYWELL, D.G.	SHOP	PARTS	SOURCES	94	107
34	SCROLL SAWING	HSM 9407	LAUTARD, GUY	SAW	SCROLLSAW	POINTERS	94	107
20	SKELETON WALL CLOCK. PART 05	HSM 9407	SMITH, W.R.	HOBBY S05	CLOCK	SKELETON	94	107
26	SINGLE SHOT RIFLE. PART 2	HSM 9407	MUELLER, W.B.	HOBBY M2	RIFLE	SINGLESHOT	94	107
46	TOOL POST GRINDER, BUILD & USE PART 3	HSM 9407	KOUHOUPT, RUDY	LATHE	GRINDER	TOOLPOST	94	107
50	MILLING MACHINE VISE CORRECTIONS	HSM 9407	MCLEAN, FRANK	MILL	VISE	CORRECTIONS	94	107
35	SPINDLE INDICATOR HOLDER	HSM 9407	RICE, R.	MILL	INDICATOR	HOLDER	94	107
39	TITAN .60. PART 3	HSM 9407	GENEVRO, G.W.	ENGINE C	AIRPLANE	TITAN .60	94	107
56	BUSHINGS, KEYWAY BROACH	HSM 9409	MCLEAN, FRANK	SHOP	BROACH	BUSHINGS	94	109
20	SERIOUS MILLING WITH THE LATHE PART 1	HSM 9409	JOHNSON, D. E.	LATHE	MILLING	ATTACHMENT	94	109
43	TAP DOGS	HSM 9409	PETTIT, G. A.	SHOP	TAPPING	DOGS	94	109
44	TITAN .60. PART 4	HSM 9409	GENEVRO, G.W.	ENGINE D	AIRPLANE	TITAN .60	94	109
20	SERIOUS MILLING WITH THE LATHE PART 1	HSM 9409	JOHNSON, D. E.	MILL	LATHE	ATTACHMENT	94	109
47	FILES AND FILING. PART 1	HSM 9409	HOFFMAN, E.G.	SHOP	FILES	FILING	94	109
50	ENDMILLING CURVES, FIXTURE FOR	HSM 9409	KOUHOUPT, RUDY	MILL	CURVES	FIXTURE	94	109
54	WORKHOLDER DESIGN TIPS. PART 3	HSM 9409	HOFFMAN, E.G.	SHOP	WORKHOLDER	DESIGN	94	109
36	SINGLE SHOT RIFLE. PART 3	HSM 9409	MUELLER, W.B.	HOBBY M3	RIFLE	SINGLESHOT	94	109
20	MILLING WITH THE LATHE. PART 1	HSM 9409	JOHNSON, D.E.	LATHE	MILLING	SERIOUS	94	109
28	SKELETON WALL CLOCK. PART 06	HSM 9409	SMITH, W.R.	HOBBY S06	CLOCK	SKELETON	94	109
45	SINGLE SHOT RIFLE. PART 4	HSM 9411	MUELLER, W.B.	HOBBY M4	RIFLE	SINGLESHOT	94	111
62	TOOLPOST, OPENSIDED, MAKING	HSM 9411	KOUHOUPT, RUDY	LATHE	TOOLPOST	OPENSIDED	94	111
60	LOCATING DEVICES	HSM 9411	HOFFMAN, E.G.	SHOP	LOCATING	DEVICES	94	111
58	BANDSAW IMPROVEMENTS	HSM 9411	MCLEAN, FRANK	SAW	BANDSAW	IMPROVEMENTS	94	111
53	REVERSING SWITCH	HSM 9411	HALBERT, R.L.	SHOP	SWITCH	REVERSING	94	111
50	FILES AND FILING. PART 2	HSM 9411	HOFFMAN, E.G.	SHOP	FILES	FILING	94	111
38	SERIOUS MILLING WITH THE LATHE PART 2	HSM 9411	JOHNSON, D. E.	MILL	LATHE	ATTACHMENT	94	111
32	TITAN .60. PART 5	HSM 9411	GENEVRO, G.W.	ENGINE E	AIRPLANE	TITAN .60	94	111
25	SKELETON WALL CLOCK. PART 07	HSM 9411	SMITH, W.R.	HOBBY S07	CLOCK	SKELETON	94	111
38	SERIOUS MILLING WITH THE LATHE PART 2	HSM 9411	JOHNSON, D. E.	LATHE	MILLING	ATTACHMENT	94	111
54	TAPERED MATERIAL CLAMPING	HSM 9411	HARMON, J	SHOP	VISE	CLAMPING	94	111
48	COUNTERSINK, CHATTERLESS	HSM 9411	HEDIN, R.S.	SHOP	COUNTERSINK	CHATTERLESS	94	111
38	MILLING WITH THE LATHE. PART 2	HSM 9411	JOHNSON, D.E.	LATHE	MILLING	SERIOUS	94	111
22	SHAPER, LUNCH BREAK	HSM 9411	SEXTON, T.	SHAPER	SHOP	REVIVING	94	111
14	TURBOCAD	HSM 9411	FOREMAN, D.	SHOP	CAD	DRAWING	94	111
30	MILLING WITH THE LATHE. PART 3	HSM 9501	JOHNSON, D.E.	LATHE	MILLING	SERIOUS	95	101
30	SERIOUS MILLING WITH THE LATHE PART 3	HSM 9501	JOHNSON, D. E.	MILL	LATHE	ATTACHMENT	95	101
56	HAND TURNING	HSM 9501	MCLEAN, FRANK	LATHE	TECHNIQUE	HAND TURNING	95	101
30	SERIOUS MILLING WITH THE LATHE PART 3	HSM 9501	JOHNSON, D. E.	LATHE	MILLING	ATTACHMENT	95	101
54	LOCATING DEVICES	HSM 9501	HOFFMAN, E.G.	SHOP	LOCATING	DEVICES	95	101
44	SINGLE SHOT RIFLE. PART 5	HSM 9501	MUELLER, W.B.	HOBBY M5	RIFLE	SINGLESHOT	95	101
22	STARTING TURNING, PART 6, CLAMPS	HSM 9501	MASON, A.	LATHE	TECHNIQUE	CLAMPS	95	101
52	OLD IRON PART 1	HSM 9501	KOUHOUPT, RUDY	SHAPER 101	SHOP	REVIVING	95	101
37	SKELETON WALL CLOCK. PART 08	HSM 9501	SMITH, W.R.	HOBBY S08	CLOCK	SKELETON	95	101
48	FILES AND FILING. PART 3	HSM 9501	HOFFMAN, E.G.	SHOP	FILES	FILING	95	101
22	SKELETON WALL CLOCK. PART 09	HSM 9503	SMITH, W.R.	HOBBY S09	CLOCK	SKELETON	95	103
46	HEAT TREATMENT, ENGINES	HSM 9503	GENEVRO, G.W.	SHOP	HEATTREAT	ENGINES	95	103
48	DIE FILER	HSM 9503	KALB, M.E.	SHOP	DIE FILER	FILING	95	103
28	SINGLE SHOT RIFLE. PART 6	HSM 9503	MUELLER, W.B.	HOBBY M6	RIFLE	SINGLESHOT	95	103
48	DIE FILER	HSM 9503	KALB, M.E.	SHOP	FILER		95	103
67	INDEX - 1994	HSM 9503	RICE, J. (EDITOR)	INDEX	1994	HSM	95	103
54	CLAMPING DEVICES, SPECIALTY, PART 1	HSM 9503	HOFFMAN, E.G.	SHOP	CLAMPS	SPECIALTY	95	103
37	MACHINIST'S CLOCK	HSM 9503	REICHART, B.	HOBBY	CLOCK	SHOP	95	103
50	OLD IRON, PART 2	HSM 9503	KOUHOUPT, RUDY	SHAPER 102	SHOP	REVIVING	95	103
34	MILL/DRILL ADVENTURES PART 1	HSM 9503	JOHNSON, D.E.	MILL 201	SETUP	ADVENTURES	95	103
40	MILLING ATT. HORIZONTAL. PART 1	HSM 9503	MCLEAN, FRANK	MILL	HORIZONTAL	ATTACHMENT	95	103
56	OLD IRON, PART 3	HSM 9505	KOUHOUPT, RUDY	SHAPER 103	SHOP	REVIVING	95	105
46	SINGLE SHOT RIFLE. PART 7	HSM 9505	MUELLER, W.B.	HOBBY M7	RIFLE	SINGLESHOT	95	105
39	SKELETON WALL CLOCK. PART 10	HSM 9505	SMITH, W.R.	HOBBY S10	CLOCK	SKELETON	95	105
48	MILLING ATT. HORIZONTAL. PART 2	HSM 9505	MCLEAN, FRANK	MILL	HORIZONTAL	ATTACHMENT	95	105
30	SPARK ERODING A BROKEN STUD	HSM 9505	LANGLOIS, R.R.	EDM 2	SHOP	PRACTICE	95	105
54	CLAMPING DEVICES, SPECIALTY, PART 2	HSM 9505	HOFFMAN, E.G.	SHOP	CLAMPS	SPECIALTY	95	105
45	DIVIDING ON THE LATHE	HSM 9505	SCHMIDT, J.	SHOP	LATHE	DIVIDING	95	105
22	EDM MACHINE, PART 1, BOX	HSM 9505	LANGLOIS, R.R.	EDM 9.3	BOX	BUILDING	95	105
22	EDM MACHINE, PART 1, GENERAL	HSM 9505	LANGLOIS, R.R.	EDM 3	EDM		95	105
32	MILL/DRILL ADVENTURES PART 2	HSM 9505	JOHNSON, D.E.	MILL 202	DOWNFEED	ADVENTURES	95	105
30	SPARK ERODING A BROKEN STUD	HSM 9505	LANGLOIS, R.R.	EDM 9	EDM	USE OF EDM	95	105
32	SKELETON WALL CLOCK. PART 11	HSM 9507	SMITH, W.R.	HOBBY S11	CLOCK	SKELETON	95	107
27	SINGLE SHOT RIFLE. PART 8	HSM 9507	MUELLER, W.B.	HOBBY M8	RIFLE	SINGLESHOT	95	107
52	DRILL GRINDER	HSM 9507	MCLEAN, FRANK	DRILL	SHARPENING	GUIDES	95	107
14	SPARKPLUG SOURCE	HSM 9507	LOWERY, B.	ENGINE	SPARKPLUG	SOURCE	95	107
58	CLAMPING DEVICES, SPECIALTY, PART 3	HSM 9507	HOFFMAN, E.G.	SHOP	CLAMPS	SPECIALTY	95	107
55	COMPACT BORING HEAD, PART 1	HSM 9507	KOUHOUPT, RUDY	MILL 101	BORING HEAD	BUILDING	95	107
40	EDM MACHINE, PART 2, POWER SUPPLY	HSM 9507	LANGLOIS, R.R.	EDM 4	POWER SUPPLY	BUILDING	95	107
22	MILL/DRILL ADVENTURES PART 3	HSM 9507	JOHNSON, D.E.	MILL 203	INDICATOR HOLDER	ADVENTURES	95	107
34	EDM MACHINE, PART 3, STEPPER & LOGIC	HSM 9509	LANGLOIS, R.R.	EDM 5	STEPPER & LOGIC	BUILDING	95	109
22	MAVERICK ENGINE, PART 1	HSM 9509	DUCLOS, PHILIP	ENGINE	HIT 'N MISS AF	GAS	95	109
54	COUNTERBORE	HSM 9509	MCLEAN, FRANK	DRILL	COUNTERBORE	BUILDING	95	109
56	CLAMPING DEVICES, SPECIALTY, PART 4	HSM 9509	HOFFMAN, E.G.	SHOP	CLAMPS	SPECIALTY	95	109
51	COMPACT BORING HEAD, PART 2	HSM 9509	KOUHOUPT, RUDY	MILL 102	BORING HEAD	BUILDING	95	109
28	SHOP	HSM 9509	ACKER, STEVE	SHOP	NEW	BUILDING	95	109
44	SKELETON WALL CLOCK. PART 12	HSM 9509	SMITH, W.R.	HOBBY S12	CLOCK	SKELETON	95	109
60	LOCATING PINS, PART 1	HSM 9511	HOFFMAN, E.G.	SHOP	LOCATING	PINS 1	95	111
48	SILVER SOLDERING FUNDEMENTALS	HSM 9511	GENEVRO, G.W.	SHOP	SOLDERING	SILVER	95	111
52	ELECTRIC MOTORS	HSM 9511	DOUGLAS, A	SHOP	MOTOR	STATIONARY	95	111
34	EDM MACHINE, PART 4, INSTALL STEPPER	HSM 9511	LANGLOIS, R.R.	EDM 6	STEPPER	BUILDING	95	111
28	MILL/DRILL ADVENTURES PART 4	HSM 9511	JOHNSON, D.E.	MILL 204	VISE	ADVENTURES	95	111
33	NEED A LIFT?	HSM 9511	WAGNER, R.F	MILL	RAISE	TABLE	95	111
47	SIMPLE TAPPING GUIDE	HSM 9511	HUFFMAN, P	DRILL	TAPPING	GUIDE	95	111
40	MAVERICK ENGINE, PART 2	HSM 9511	DUCLOS, PHILIP	ENGINE	HIT 'N MISS AG	GAS	95	111
56	COMPACT BORING HEAD, PART 3	HSM 9511	KOUHOUPT, RUDY	MILL 103	BORING HEAD	BUILDING	95	111
34	EDM MACHINE, PART 5, THE HEAD	HSM 9601	LANGLOIS, R.R.	EDM 7	HEAD	BUILDING	96	101
22	D1-4 FIXTURE PLATE, EMCO-MAIER	HSM 9601	LINDQUIST, D.	LATHE	FIXTURE	D1-4	96	101
26	MILL/DRILL ADVENTURES PART 5	HSM 9601	JOHNSON, D.E.	MILL 205	SPINDLE LOCK	ADVENTURES	96	101
12	EDM MAKER	HSM 9601	VAN DUYN, L.	EDM	POWER SUPPLY	BUILDING	96	101
18	MILL/DRILL ADVENTURES COMMENTS	HSM 9601	WEISS, F.H.	MILL	INDICATOR	ADVENTURES	96	101
54	CEMENT MIXER, LITTLE, PART 1	HSM 9601	KOUHOUPT, RUDY	HOBBY 1	CEMENT MIXER	PLANS	96	101
62	LOCATING PINS, PART 2	HSM 9601	HOFFMAN, E.G.	SHOP	LOCATING	PINS 2	96	101
57	CHUCK CLEANING, UNIVERSAL	HSM 9601	MCLEAN, FRANK	LATHE	CHUCK	CLEANING	96	101
33	PLASTICS	HSM 9601	DOWLING, T. W.	SHOP	PLASTICS	ENGRG	96	101
44	MAVERICK ENGINE, PART 3	HSM 9601	DUCLOS, PHILIP	ENGINE	HIT 'N MISS AH	GAS	96	101
52	GERMAN SILVER ESCUTCHEONS	HSM 9601	MORROW, L	SHOP	TECHNIQUE	ESCUTCHEONS	96	101
6	MAGAZINE HOLDERS	HSM 9601	ROTH, M	SHOP	HOLDERS	MAGAZINE	96	101
50	LATHE TIPS	HSM 9601	STONE & HOFFMAN	LATHE	TECHNIQUE	TIPS	96	101
24	SHERLINE WHEELCUTTING (CLOCK) PART 1	HSM 9603	SMITH, W.R.	LATHE	SHERLINE	ADAPTING	96	103
57	DRILL GRINDER	HSM 9603	MCLEAN, FRANK	DRILL	SHARPENING	ATTACHMENT	96	103
8	SINGLE PHASE MOTORS	HSM 9603	PIERCE, P.E.	SHOP	MOTOR	SINGLE PHASE	96	103
32	MILL/DRILL ADVENTURES PART 6	HSM 9603	JOHNSON, D.E.	MILL 206	SPINDLE LOCK	ADVENTURES	96	103
37	EDM MACHINE, PART 6, ODDS N ENDS	HSM 9603	LANGLOIS, R.R.	EDM 8	ODDS N ENDS	BUILDING	96	103
71	INDEX - 1995	HSM 9603	RICE, J. (EDITOR)	INDEX	1995	HSM	96	103
54	LOCATING PINS, PART 1	HSM 9603	HOFFMAN, E.G.	SHOP	LOCATING	PINS 3	96	103
48	BUTT WELDER	HSM 9603	HABICHER, W.F.	SHOP	BUTTWELDER	BUILDING	96	103
50	CEMENT MIXER, LITTLE, PART 2	HSM 9603	KOUHOUPT, RUDY	HOBBY 2	CEMENT MIXER	PLANS	96	103
20	SILVER SOLDERING, ART OF	HSM 9603	HIRAOKA, KOZO	SHOP	SOLDERING	SILVER	96	303
31	BEVEL GAGE W/PROTRACTOR	HSM 9605	WRIGHT, T.	SHOP	GAGE	BEVEL	96	105
28	TANGENTIAL CUTTING	HSM 9605	BURKE, D.	LATHE	TOOL HOLDER	DIAMOND	96	105
50	DC VARIABLE SPEED MOTOR (SEE J/F97)	HSM 9605	EYER, C.	SHOP	MOTOR	DC	96	105
49	REMOTE SWITCH, MILL.	HSM 9605	VOSS, C.O.	MILL	SWITCH	REMOTE	96	105
60	FIXTURING W/COLLETS PART 1	HSM 9605	HOFFMAN, E.G.	SHOP	FIXTURE	COLLETS 1	96	105
42	MAVERICK ENGINE, PART 4	HSM 9605	DUCLOS, PHILIP	ENGINE	HIT 'N MISS AI	GAS	96	103
16	MOTOR CONNECTIONS	HSM 9605	PIERCE, P.E.	MILL	MOTOR	AC	96	105
36	SHERLINE WHEELCUTTING (CLOCK) PART 2	HSM 9605	SMITH, W.R.	LATHE	SHERLINE	ADAPTING	96	105
16	MOTOR CONNECTIONS	HSM 9605	PIERCE, P.E.	SHOP	MOTOR	AC	96	105
58	TREPANNING TOOL	HSM 9605	MCLEAN, FRANK	SHOP	TREPANNING	BUILDING	96	105
55	CEMENT MIXER, LITTLE, PART 3	HSM 9605	KOUHOUPT, RUDY	HOBBY 3	CEMENT MIXER	PLANS	96	105
46	DIVIDING HEAD	HSM 9605	COLLINS, M.	SHOP	DIVIDING HEAD	BUILDING	96	105
24	DIAMOND TOOLHOLDER (TANGENTIAL)	HSM 9605	KOUHOUPT, RUDY	LATHE	TOOL HOLDER	DIAMOND	96	105
70	FLAMELICKER CASTINGS	HSM 9605	KREUTER, B.	ENGINE	CASTINGS	HEAT	96	105
51	CEMENT MIXER, LITTLE, PART 4	HSM 9607	KOUHOUPT, RUDY	HOBBY 4	CEMENT MIXER	PLANS	96	107
54	TAIG TOOL REST	HSM 9607	MCLEAN, FRANK	LATHE	TOOL REST	TAIG	96	107
36	T-REST FOR SHERLINE	HSM 9607	SMITH, W.R.	LATHE	SHERLINE	ADAPTING	96	107
50	TUNGSTEN CARBIDE SHARPENING	HSM 9607	NETZEL, W.	DRILL	SHARPENING	CARBIDE	96	107
48	INDICATOR STAND	HSM 9607	BOWER, E.L.	SHOP	STAND	INDICATOR	96	107
60	FIXTURING W/COLLETS PART 2	HSM 9607	HOFFMAN, E.G.	SHOP	FIXTURE	COLLETS 2	96	107
56	DIAMOND DRESSERS	HSM 9607	BOCHERT, J.	GRINDER	DRESSERS	DIAMOND	96	107
49	STUCK CHUCKS	HSM 9607	KRATT, H.J.	LATHE	CHUCK	STUCK	96	107
58	CARBIDE INSERTS	HSM 9607	WITHEROW, J.	MILL	CARBIDE	INSERT	96	107
30	MILL/DRILL ADVENTURES PART 7	HSM 9607	JOHNSON, D.E.	MILL	INDICATORS	ADVENTURES	96	107
46	SPINDLE STOP, INTERNAL	HSM 9607	BLACKMON, B. J.	LATHE	STOP	SPINDLE	96	107
44	TABLE STOP	HSM 9607	MADISON, J.	MILL	STOP	TABLE	96	107
33	CIRCULAR SAW STEEL CUTTER	HSM 9609	ACKER, STEVE	GUNS	CUTTER	STEEL	96	109
43	WALKING STAFF	HSM 9609	TITUS, D.	HOBBY	STAFF	WALKING	96	109
52	CHUCK BACKPLATE	HSM 9609	MCLEAN, FRANK	LATHE	CHUCK	BACKPLATE	96	109
28	HOT BLUING STEEL	HSM 9609	ACKER, STEVE	GUNS	BLUE	PROCESS	96	109
18	TOOL & CUTTER GRINDER (QUORN???)	HSM 9609	VREELAND, D.	GRINDER	T & C	PHOTOS	96	109
34	ELEVATED LATHE SPINDLE PART 1	HSM 9609	MCLEAN, FRANK	LATHE	SPINDLE	ELEVATED	96	109
62	INTERNET	HSM 9609	MENDUM,J.H.	SHOP	COMMUNICATION	TALK	96	109
56	REFLECTIONS	HSM 9609	MCLEAN, FRANK	SHOP	MACHINES	TALK	96	109
23	LATHE REVIEW	HSM 9609	NOLAN, P.	SHOP	MACHINES	REVIEW	96	109
48	STEAM/AIR ENGINE	HSM 9609	KEREKGYARTO,G.	ENGINE	AIR	STEAM	96	109
23	JET 9X20 LATHE REVIEW	HSM 9609	NOLAN, P.	LATHE	MACHINES	REVIEW	96	109
58	MAKING COLLETS PART 1	HSM 9609	KOUHOUPT, RUDY	LATHE	COLLETS	MAKING	96	109
38	CYLINDERS & PISTONS, 2 STROKE	HSM 9611	GENEVRO, G.W.	ENGINE	PISTON RING	MAKING	96	111
52	TAILSTOCK DRAWBAR	HSM 9611	NYMAN, P.	LATHE	TAILSTOCK	DRAWBAR	96	111
32	ELEVATED LATHE SPINDLE PART 2	HSM 9611	MCLEAN, FRANK	LATHE	SPINDLE	ELEVATED	96	111
48	WHATZIT VARIATIONS	HSM 9611	HOLLENBECK, K.	ENGINE	HIT 'N MISS AN	VARIATIONS	96	111
56	MAKING COLLETS PART 2	HSM 9611	KOUHOUPT, RUDY	LATHE	COLLETS	MAKING	96	111
59	SPUR CENTER (WOOD)	HSM 9611	MCLEAN, FRANK	LATHE	SPUR CENTER	WOOD	96	111
17	DC VARIABLE SPEED MOTOR (SEE J/F97)	HSM 9611	EYER, C.	SHOP	MOTOR	DC	96	111
24	STIRLING-POWERED TRACTOR PART 1	HSM 9611	KOUHOUPT, RUDY	ENGINE	TRACTOR 1	STIRLING	96	111
55	ATLAS TAILSTOCK	HSM 9611	JONES, B.	LATHE	TAILSTOCK	MODIFICATION	96	111
46	HANDLE ON YOUR LATHE	HSM 9611	GASCOYNE, J.B.	LATHE	HANDLE	LEADSCREW	96	111
49	REBIRTH OF SB MODEL 10 LATHE	HSM 9611	GRAHAM, D.	LATHE	REBUILD	MODEL C	96	111
62	FIXTURING W/COLLETS PART 3	HSM 9611	HOFFMAN, E.G.	SHOP	FIXTURE	COLLETS 3	96	111
62	RADIAL AIR ENGINE	HSM 9701	LIVINGSTON, J.	ENGINE	DESCRIPTION	AIR	97	101
16	EDM MACHINE, LETTER	HSM 9701	LANGLOIS, R.R.	EDM 9.5	LETTER	BUILDING	97	101
53	CHUCKS AND FACEPLATES, MOUNTING	HSM 9701	KOUHOUPT, RUDY	LATHE	CHUCK	MOUNTING	97	101
22	CHUCKS, TRUEING A 3 JAW	HSM 9701	DOOLIN, T.J.	LATHE	CHUCK	3 JAW	97	101
44	STIRLING-POWERED TRACTOR PART 2	HSM 9701	KOUHOUPT, RUDY	ENGINE	TRACTOR 2	STIRLING	97	101
60	DC VARIABLE SPEED MOTOR (SUPPLEMENT TO HSM M/J 96)	HSM 9701	EYER, C.	SHOP	MOTOR	DC	97	101
26	5C COLLET ADAPTER	HSM 9701	JOHNSON, D.E.	LATHE	COLLET	CHUCK	97	101
56	THOMAS REGISTER, HOW TO USE	HSM 9701	BATORY, D	SHOP	LOCATING	MFG	97	101
48	TOOL REST FOR TURNING WOOD	HSM 9701	MCLEAN, FRANK	LATHE	TOOL REST	WOOD	97	101
16	EDM MACHINE, LETTER, SATISFIED CUSTOMER	HSM 9701	MCKEE, J.	EDM	COMPLETED	BUILT	97	101
63	FIXTURING W/COLLETS PART 4	HSM 9701	HOFFMAN, E.G.	SHOP	FIXTURE	COLLETS 4	97	101
58	GRINDING WHEEL	HSM 9701	MUELLER, W.B.	GRINDER	WHEEL	SAFETY	97	101
36	BEAD BLASTER	HSM 9701	ACKER, STEVE	SHOP	BEAD BLASTER	MAKING	97	101
54	WOODWORKING	HSM 9703	ERNEST, J.F.	SHOP	WOODWORKING		97	103
34	TAP WRENCH	HSM 9703	LINCOLN, W.A.	SHOP	TAP	WRENCH PILOTED	97	103
28	STIRLING-POWERED TRACTOR PART 3	HSM 9703	KOUHOUPT, RUDY	ENGINE	TRACTOR 3	STIRLING	97	103
71	INDEX - 1996	HSM 9703	RICE, J. (EDITOR)	INDEX	1996	HSM	97	103
58	FIXTURING W/COLLETS PART 5	HSM 9703	HOFFMAN, E.G.	SHOP	FIXTURE	COLLETS 5	97	103
40	BRAZED REPAIR	HSM 9703	SCHONHER, S.	SHOP	BRAZING	REPAIR	97	103
46	ATLAS MILL RECONDITIONING	HSM 9703	KOUHOUPT, RUDY	MILL	ATLAS	RECONDITIONING	97	103
56	TAPERED END MILL	HSM 9703	MCLEAN, FRANK	MILL	TAPERED END MILL	MAKING	97	103
45	FACEPLATE TOOLHOLDER	HSM 9703	THOMSON, D.M.	LATHE	FACEPLATE	TOOLHOLDER	97	103
39	SPINDLE LOCK	HSM 9703	LEGNAME, RUDI	MILL	SPINDLE LOCK		97	103
41	DIVIDING HEAD, PART 1	HSM 9703	KUZMACK, RICH	MILL	DIVIDING HEAD 101		97	103
44	STIRLING-POWERED TRACTOR PART 4	HSM 9705	KOUHOUPT, RUDY	ENGINE	TRACTOR 4	STIRLING	97	105
62	FIXTURING W/COLLETS PART 6	HSM 9705	HOFFMAN, E.G.	SHOP	FIXTURE	COLLETS 6	97	105
51	SHAPERS	HSM 9705	MCLEAN, FRANK	SHOP	SHAPERS		97	105
28	"VICTORIAN" ENGINE, PART 1	HSM 9705	DUCLOS, PHILIP	ENGINE	HIT 'N MISS AT	GAS	97	105
37	DIVIDING HEAD, PART 2	HSM 9705	KUZMACK, RICH	MILL	DIVIDING HEAD 104		97	105
58	ATLAS MILLING MACHINE (RECONDITIONING)	HSM 9705	KOUHOUPT, RUDY	MILL	ATLAS	RECONDITIONING	97	105
32	MILL/DRILL ADVENTURES PART 8	HSM 9707	JOHNSON, D.E.	MILL	HANDWHEELS	ADVENTURES	97	107
37	LATHE STOP, ADJUSTABLE	HSM 9707	TITUS, D.	LATHE	STOP	CARRIAGE	97	107
42	"VICTORIAN" ENGINE, PART 2	HSM 9707	DUCLOS, PHILIP	ENGINE	HIT 'N MISS AU	GAS	97	107
52	SCREWDRIVERS	HSM 9707	SCHULZINGER, J.	SHOP	SCREWDRIVER		97	107
40	ELECTRICAL CONTROL, BASIC	HSM 9707	COHON, HAROLD G.	SHOP	ELECTRICAL	CONTROL	97	107
28	DRILL DOCTOR REVIEW	HSM 9707	JOLY, D.	DRILL	SHARPENING	DRILL DOCTOR	97	107
63	FIXTURING W/COLLETS PART 7	HSM 9707	HOFFMAN, E.G.	SHOP	FIXTURE	COLLETS 7	97	107
26	BEAD BLASTER	HSM 9707	ACKER, STEVE	SHOP	BEADBLASTER		97	107
58	TOOL BITS, GRINDING	HSM 9707	BURNS, FRANK E.	LATHE	TOOL BITS	GRINDING	97	107
58	TOOL BITS, GRINDING	HSM 9707	BURNS, FRANK E.	GRINDER	TOOL BITS	GRINDING	97	107
60	ATLAS MILLING MACHINE	HSM 9707	KOUHOUPT, RUDY	MILL	ATLAS	RECONDITIONING	97	107
48	DIVIDING HEAD, PART 3	HSM 9707	KUZMACK, RICH	MILL	DIVIDING HEAD 103		97	107
28	DRILL DOCTOR REVIEW	HSM 9707	JOLY, D.	GRINDER	SHARPENER	DRILL	97	107
54	STIRLING-POWERED TRACTOR PART 5	HSM 9707	KOUHOUPT, RUDY	ENGINE	TRACTOR 5	STIRLING	97	107
56	ACCURATE SQUARES, MAKING PART 1	HSM 9709	KOUHOUPT, RUDY	SHOP	SQUARE	CONSTRUCTION	97	109
24	FINE FEED, VERTICAL MILL	HSM 9709	WADHAM, G.	MILL	DOWNFEED	MANUAL	97	109
61	TEST TUBE STIRLING ENGINE	HSM 9709	O'NEIL, DAVE	ENGINE	STIRLING	TESTTUBE	97	109
45	SEAT FOR BANDSAW (4 x 6)	HSM 9709	DRAYSON, D.A.	SAW	TABLE	SEAT	97	109
50	DIVIDING HEAD, PART 4	HSM 9709	KUZMACK, RICH	MILL	DIVIDING HEAD 102		97	109
54	CLAMP FOR TOOL BIT (TOOLHOLDER)	HSM 9709	GENEVRO, G.W.	LATHE	TOOL HOLDER	CLAMP	97	109
40	MILL/DRILL ADVENTURES PART 9	HSM 9709	JOHNSON, D.E.	MILL	HANDWHEELS	ADVENTURES	97	109
62	FIXTURING W/COLLETS PART 8	HSM 9709	HOFFMAN, E.G.	SHOP	FIXTURE	COLLETS 8	97	109
58	MILL/DRILL ADVENTURE, ANOTHER	HSM 9709	HOKE. GEORGE E.	MILL	RAMPS		97	109
31	"VICTORIAN" ENGINE, PART 3	HSM 9709	DUCLOS, PHILIP	ENGINE	HIT 'N MISS AV	GAS	97	109
47	STIRLING-POWERED TRACTOR PART 6	HSM 9709	KOUHOUPT, RUDY	ENGINE	TRACTOR 6	STIRLING	97	109
60	VISE JAW FIXTURES PART ONE	HSM 9711	HOFFMAN, E.G.	SHOP	FIXTURE	VISE 1	97	111
32	FINE FEED, VERTICAL MILL	HSM 9711	WADHAM, G.	MILL	FEED	SCRAPING	97	111
26	SCRAPE AND SHAPE PART ONE	HSM 9711	THOMAS, S.M.	SHOP	SCRAPING 1	TECHNIQUE	97	111
55	MAGNIFYING GLASS	HSM 9711	LAUTARD, GUY	SHOP	MAGNIFIER		97	111
46	STIRLING-POWERED TRACTOR PART 7	HSM 9711	KOUHOUPT, RUDY	ENGINE	TRACTOR 7	STIRLING	97	111
63	ANGLE PLATE, MAKING PART 2	HSM 9711	KOUHOUPT, RUDY	SHOP	ANGLE PLATE	MAKING	97	111
40	"VICTORIAN" ENGINE, PART 5	HSM 9711	DUCLOS, PHILIP	ENGINE	HIT 'N MISS AX	GAS	97	111
58	ALIGNMENT, LATHE	HSM 9711	FANGOUR, JOE	LATHE	ALIGNMENT		97	111
50	BALL HANDLES, BALANCED	HSM 9711	SEXTON, T.	SHOP	HANDLES	BALL	97	111
54	INDEXING TABLE, REWORKED	HSM 9801	KUZMACK. RICH	MILL	DIVIDING	TABLE	98	101
56	PRIME SHOW	HSM 9801	RICE, JOE	HOBBY	REVIEW	PRIME	98	101
42	TELEGRAPH KEY, PART ONE	HSM 9801	RIPKA, DOUG	HOBBY	TELEGRAPH	KEY	98	101
63	INDEXING PARTS IN A VISE	HSM 9801	DARNER, RONALD G.	SHOP	VISE	INDEXING	98	101
47	DRAWBAR KNOCKER	HSM 9801	WELLS, NORMAN	MILL	DRAWBAR	KNOCKER	98	101
28	LAWN EDGER "EDGE MASTER" - PART ONE	HSM 9801	JOHNSON, D. E.	HOBBY J1	EDGER	CONSTRUCTION	98	101
66	HEADSTOCK ADJUSTER, SHERLINE	HSM 9801	DENNING, JOHN, H.	LATHE	HEADSTOCK ADJUSTER	SHERLINE	98	101
64	VISE JAW FIXTURES PART TWO	HSM 9801	HOFFMAN, E.G.	SHOP	FIXTURE	VISE 2	98	101
48	"VICTORIAN" ENGINE, PART 4	HSM 9801	DUCLOS, PHILIP	ENGINE	HIT 'N MISS AW	GAS	98	101
60	CLAPPER, MAKING	HSM 9801	KOUHOUPT, RUDY	SHAPER	CLAPPER	CONSTRUCTION	98	101
35	SCRAPE AND SHAPE PART TWO	HSM 9801	THOMAS, S.M.	SHOP	SCRAPING 2	TECHNIQUE	98	101
14	LETTER FROM PAUL	HSM 9803	PIERCE, PAUL E.	SHOP	LETTER	PHILIP D.	98	103
62	VISE JAW FIXTURES PART THREE	HSM 9803	HOFFMAN, E.G.	SHOP	FIXTURE	VISE 3	98	103
36	TELEGRAPH KEY, PART TWO	HSM 9803	RIPKA, DOUG	HOBBY	TELEGRAPH	KEY	98	103
30	LAWN EDGER "EDGE MASTER" - PART TWO	HSM 9803	JOHNSON, D. E.	HOBBY J1	EDGER	CONSTRUCTION	98	103
51	COPPER AND IT'S ALLOYS	HSM 9803	GENEVRO, GEORGE	SHOP	METAL	COPPER	98	103
71	INDEX - 1997	HSM 9803	RICE, J. (EDITOR)	INDEX	1997	HSM	98	103
60	BEAD BLAST GUN MODIFICATIONS	HSM 9803	HOLM, PAUL J.	SHOP	BEADBLASTER	MODIFICATION	98	103
41	SCRAPE AND SHAPE PART THREE	HSM 9803	THOMAS, S.M.	SHOP	SCRAPING 3	TECHNIQUE	98	103
48	ADJUSTABLE ANGLE PLATE, PART ONE	HSM 9803	KOUHOUPT, RUDY	MILL	ANGLE PLATE	CONSTRUCTION	98	103
35	SCRAPE AND SHAPE PART FOUR	HSM 9805	THOMAS, S.M.	SHOP	SCRAPING 4	TECHNIQUE	98	105
26	FILING REST FOR SHERLINE LATHE	HSM 9805	SMITH, W.R.	LATHE	REST	FILING	98	105
46	QUORN GRINDER ADDITIONS PART ONE	HSM 9805	MUELLER, W.B.	GRINDER	QUORN	MODIFICATIONS	98	105
63	GREASE ADAPTER	HSM 9805	THOMPSON, J.	LATHE	S/B/	GREASER	98	105
54	LAWN EDGER "EDGE MASTER" - PART 3	HSM 9805	JOHNSON, D. E.	HOBBY J1	EDGER	CONSTRUCTION	98	105
62	MILL/DRILL MODIFICATIONS	HSM 9805	SCHAEFFER, W.K.	MILL	MODIFICATION	RACK	98	105
60	VISE JAW FIXTURES PART FOUR	HSM 9805	HOFFMAN, E.G.	SHOP	FIXTURE	VISE 4	98	105
42	ADJUSTABLE ANGLE PLATE, PART TWO	HSM 9805	KOUHOUPT, RUDY	MILL	ANGLE PLATE	CONSTRUCTION	98	105
26	SHOOTING STAR DRO	HSM 9807	JOHN GRAFF	MILL	INSTALLATION	DRO	98	107
38	SCRAPE AND SHAPE PART FIVE	HSM 9807	THOMAS, S.M.	SHOP	SCRAPING 5	TECHNIQUE	98	107
58	WOODEN WORK SUPPORT	HSM 9807	ACKER, STEVE	MILL	WORK	SUPPORT	98	107
46	QUORN GRINDER ADDITIONS PART TWO	HSM 9807	MUELLER, W.B.	GRINDER	QUORN	MODIFICATIONS	98	107
44	PULLET ARRANGEMENT	HSM 9807	REYNOLDS, JIM	DRILL	PULLEYS	SPEEDS	98	107
63	VISE JAW FIXTURES PART FIVE	HSM 9807	HOFFMAN, E.G.	SHOP	FIXTURE	VISE 5	98	107
30	SHAPER, BUILDING, PART ONE	HSM 9807	COLLINS, MARSH	SHAPER	CONSTRUCTION		98	107
60	ADJUSTABLE ANGLE PLATE, PART THREE	HSM 9807	KOUHOUPT, RUDY	MILL	ANGLE PLATE	CONSTRUCTION	98	107
53	LAWN EDGER "EDGE MASTER" - PART 4	HSM 9807	JOHNSON, D. E.	HOBBY J1	EDGER	CONSTRUCTION	98	107
54	TAPERED REAMERS	LS 9607	MCLEAN, FRANK	DRILL	REAMERS	MAKING	96	307
54	TAPERED REAMERS	LS 9607	MCLEAN, FRANK	MILL	REAMERS	MAKING	96	307
45	HAND TOOLS	LS 9711	HIRAOKA, KOZO	SHOP	HAND TOOLS	WORKSHOP	97	311
17	SQUARING THE CIRCLE	METALWKG 1	MARX, A.	LATHE	BROACH
14	LATHE SETUP TIPS	METALWKG 1	TORGERSON, R.	LATHE	SETUP
20	LATHE SHEARPIN	METALWKG 1	TORGERSON, R.	LATHE	SHEARPIN
202	DIVIDING HEAD PLATES	METALWKG 1	JOHNSON, D. E.	SHOP	DIVIDING HEAD
95	VERNIER DIVIDING HEAD	METALWKG 1	MARX, A.	SHOP	DIVIDING HEAD
206	FILE HANDLES	METALWKG 1	PATRICK, R.	SHOP	HANDLE	FILES
194	HARDNESS TESTER	METALWKG 1	HINSHAW, L.	SHOP	HARDNESS	TESTER
44	REVERSE FOR A SMALL LATHE	METALWKG 1	FELLER, E.T.	LATHE	REVERSE
38	PIPE CENTER FOR LATHES	METALWKG 1	SCHARPLAZ, J.D.	LATHE	CENTER	PIPE
24	TAPERS ON OBLONGS	METALWKG 1	HAMILL, J.	MILL	TAPERS
198	DRILL GRINDER	METALWKG 1	TORGERSON, R.	GRINDER	SHARPENING	DRILL
122	MILLING COLUMN	METALWKG 1	TAYLOR, H.	MILL	COLUMN
114	SADDLE V-BLOCK	METALWKG 1	DUBOSKY, E.	MILL	V-BLOCK
168	TOOLS FOR WOODWORKING	METALWKG 1	ROUBAL, W.T.	SHOP	WOODWORKING
196	DRILL PRESS DEPTH GAGE	METALWKG 1	YOUNG, M.	DRILL	DEPTH GAGE
135	TILTING MILL TABLE	METALWKG 1	YAMAMOTO, M. T.	MILL	TABLE
128	TWO HANDY JIGS	METALWKG 1	DUBOSKY, E.	MILL	V-BLOCK
100	BUTTON V-BLOCK	METALWKG 1	DUBOSKY, E.	MILL	V-BLOCK
220	MILL/LATHE GRINDER	METALWKG 1	DUCLOS, PHILIP	GRINDER	MILL
2	ENGINE TURNING MADE EASY	METALWKG 1	MARCHESE, R.	DRILL	ENGINE TURNING
8	SCROLL CHUCK PRECISION	METALWKG 1	TORGERSON, R.	LATHE	CHUCK
62	STEADY IMPROVEMENT	METALWKG 1	VAUGHAN, W.B.	LATHE	STEADY REST
37	AUTO CARRIAGE STOP	METALWKG 1	LEBARON, R.P.	LATHE	STOP
68	LATHE THREADING STOP	METALWKG 1	HEDIN, R.S.	LATHE	STOP
26	BASIC METAL FINISHES	METALWKG 1	HARRILL, J.	SHOP	FINISHES
41	MYFORD, POP-STOP	METALWKG 1	YOUNG, M.	LATHE	STOP
110	MILLING SAW ARBOR	METALWKG 1	GENEVRO, G.W.	MILL	SLITTING SAW	ARBOR
64	RAM TAILSTOCK	METALWKG 1	CLARKE, T.M.	LATHE	TAILSTOCK
112	DOWNFEED SCALE	METALWKG 1	WILSON, G.	DRILL	FEED SCALE
95	VERNIER DIVIDING HEAD	METALWKG 1	MARX, A.	MILL	DIVIDING HEAD
186	HAND VISE	METALWKG 1	GREEN, W.F.	SHOP	VISE
220	MILL/LATHE GRINDER	METALWKG 1	DUCLOS, PHILIP	LATHE	GRINDER
114	SADDLE V-BLOCK	METALWKG 1	DUBOSKY, E.	SHOP	V-BLOCK
11	LOCATING	METALWKG 1	GASCOYNE, J.B.	DRILL	LOCATING
128	TWO HANDY JIGS	METALWKG 1	DUBOSKY, E.	SHOP	V-BLOCK
48	QUICK CHANGE GEARBOX	METALWKG 1	TOSCANO, E.	LATHE	QUICKCHANGE	CHANGEGEAR
234	CANNON, 32# SEACOAST	METALWKG 1	GREEN, W.F.	HOBBY	CANNON	SEACOAST
71	BRACKET, CHANGE GEAR	METALWKG 1	HARMAN, S.	LATHE	QUICKCHANGE	BRACKET
178	FOUR STATION GRINDER	METALWKG 1	SCHARPLAZ, J.D.	GRINDER	GRINDER
100	BUTTON V-BLOCK	METALWKG 1	DUBOSKY, E.	SHOP	V-BLOCK
98	ROTARY TABLE	METALWKG 1	WELLCOME, S.G	MILL	ROTARY	TABLE
79	CAN YOU HANDLE IT	METALWKG 1	MASON, H.	LATHE	TECHNIQUE
174	BELT SANDER	METALWKG 1	HEDIN, R.S.	GRINDER	BELTSANDER
88	LATHE DIEHOLDER	METALWKG 1	BLANDFORD, P.	LATHE	DIEHOLDER
30	COLLET ADAPTER, 5C AND R8	METALWKG 1	DUCLOS, PHILIP	LATHE	COLLET	CHUCK
56	COLLET ADAPTER, 5C	METALWKG 1	LOOP, PAT	LATHE	COLLET	CHUCK
28	CAST IRON SOURCES	METALWKG 1	KOPF. J.	SHOP	CAST IRON
189	WING DIVIDER	METALWKG 1	GINGERY, D.	SHOP	LAYOUT	DIVIDER
152	BAND SAW SPEED REDUCER	METALWKG 1	NELSON, R.	SAW	SPEED REDUCER
144	GRINDER TABLE	METALWKG 1	MASON, H.	GRINDER	TABLE	GRINDER
65	FOURWAY TOOL TURRET	METALWKG 1	HANNUM, R.C.	LATHE	TURRET
92	SURFACE GRINDING	METALWKG 1	KEET, A.	GRINDER	SURFACE
214	HAMMER, BRASS	METALWKG 1	DAVIDSON, W.	SHOP	HAMMER
217	WELDING TABLES	METALWKG 1	WALKER, R.	SHOP	TABLES	WELDING
122	MILLING COLUMN	METALWKG 1	TAYLOR, H.	LATHE	COLUMN
226	CURVED SPOKE FLYWHEEL	METALWKG 1	DUCLOS, PHILIP	ENGINE	FLYWHEEL	CURVED
90	FLYCUTTER	METALWKG 1	GENEVRO, G.W.	MILL	FLY CUTTER
210	TRY SQUARES, ADJUSTABLE	METALWKG 1	WRIGHT, T.	SHOP	SQUARE
121	MILL/DRILL MODIFICATIONS	METALWKG 1	HOLM, P.J.	MILL	MODIFICATIONS	VISE KEY
112	DOWNFEED SCALE	METALWKG 1	WILSON, G.	MILL	FEED SCALE
157	CYLINDRICAL SQUARE	METALWKG 1	WRIGHT, T.	SHOP	SQUARE
60	EXPANDING MANDREL	METALWKG 1	WASHBURN, R.A.	LATHE	MANDREL
92	SURFACE GRINDING	METALWKG 1	KEET, A.	MILL	GRINDING
76	CROSSFEED LEVER	METALWKG 1	TORGERSON, R.	LATHE	CROSSFEED
220	MILL/LATHE GRINDER	METALWKG 1	DUCLOS, PHILIP	MILL	GRINDER
138	INDICATOR BASE	METALWKG 1	TORGERSON, R.	SHOP	INDICATOR	BASE
154	DIAL INDICATOR ADAPTER	METALWKG 1	LAUTARD, GUY	SHOP	INDICATOR	BASE
220	MILL/LATHE GRINDER	METALWKG 1	DUCLOS, PHILIP	GRINDER	LATHE	TOOLPOST
192	SWARF COLLECTOR	METALWKG 1	JONES, B.	SHOP	SWARF	COLLECTOR
220	MILL/LATHE GRINDER	METALWKG 1	DUCLOS, PHILIP	GRINDER	LATHE
160	SCROLL SAW	METALWKG 1	HEDIN, R.S.	SAW	SCROLLSAW
4	MILL/DRILL IMPROVEMENTS	METALWKG 1	DAVIDSON, W.	MILL	IMPROVE DOWNFEED DIAL
241	HUFF 'N PUFF ENGINE	METALWKG 1	DUCLOS, PHILIP	ENGINE	HUFF 'N PUFF	BREATH
34	QUICK CHANGE TOOLPOST	METALWKG 1	FELLER, E.T.	LATHE	TOOLPOST
198	DRILL GRINDER	METALWKG 1	TORGERSON, R.	DRILL	SHARPENING
34	ROLLING TAILSTOCK ARBOR	METALWKG 2	JOHNSON, D. E.	LATHE	ARBOR	TAILSTOCK
132	INDICATOR CLAMPS FOR LATHE BEDS	METALWKG 2	TORGERSON, R.	SHOP	CLAMP	INDICATOR
111	HIGH EFFICIENCY SCREW PRESS	METALWKG 2	JOHNSON, D. E.	SHOP	PRESS	SCREW
48	SPRING LOADED CENTER	METALWKG 2	GENEVRO, G.W.	LATHE	CENTERFINDER	SPRINGLOADED
250	SKYPOD FOR PHOTOGRAPHER	METALWKG 2	WILSON, G.	HOBBY	"SKYPOD"	PHOTO
202	ELLIPTICAL ROTARY ENGINE	METALWKG 2	HEDIN, R.S.	ENGINE	ROTARY	ELLIPTICAL
10	MATHEMATICS OF A DIVIDING HEAD	METALWKG 2	WELLCOME, S.G	SHOP	DIVIDING HEAD	MATHEMATICS
98	COOLANT TANK & PUMP	METALWKG 2	TORGERSON, R.	SHOP	COOLANT	SYSTEM
226	TWO CYLINDER OSCILLATING STEAM ENGINE	METALWKG 2	HEDIN, R.S.	ENGINE	OSCILLATING	TWO CYLINDER
143	COOLANT APPLICATOR	METALWKG 2	WILSON, G.	SHOP	COOLANT	APPLICATOR
62	CARRIAGE WAY COVERS	METALWKG 2	VREELAND, D.	LATHE	COVERS	WAY
154	SLOT ANVIL DEPTH GAGE "MIKE"	METALWKG 2	DUBOSKY, E.	SHOP	DEPTH GAGE
101	CUTTING EDGE	METALWKG 2	MARX, A.	GRINDER	SHARPENING	TOOL BIT
178	TOOL & CUTTER GRINDER	METALWKG 2	WILSON, G.	GRINDER	T & C	TOOL BIT
245	FINGER TREADLE	METALWKG 2	PETERSEN, B.	ENGINE	FINGER TREADLE
50	SQUARE COLLETS	METALWKG 2	HEDIN, R.S.	LATHE	COLLETS	SQUARE
198	GLASS CUTTER FOR DRILL PRESS	METALWKG 2	NEWCOMB, R.	SHOP	GLASS CUTTER	DRILL PRESS
196	FASTENER GAUGE	METALWKG 2	KELLER, P.	SHOP	GAUGE
157	HEIGHT GAGE CONVERSION	METALWKG 2	TORGERSON, R.	SHOP	GAGE	HEIGHT
170	TAPPING BLOCK	METALWKG 2	SISSON, L.	SHOP	TAPPING BLOCK
21	SHOULDER BOLT TOOLING	METALWKG 2	GINGERY, D.	SHOP	TECHNIQUE	SHOULDER BOLTS
164	UNIVERSAL BELT TENSIONER	METALWKG 2	JOHNSON, D. E.	SHOP	TENSIONER	BELT
138	ANGLE PLATE, ADJUSTABLE	METALWKG 2	SISSON, L.	SHOP	ANGLE PLATE	ADJUSTABLE
28	COLLET ADAPTER, 5C	METALWKG 2	VAN DUYN, L.	LATHE	COLLET	CHUCK
172	SINGLE BEAM TRAMMEL	METALWKG 2	TORGERSON, R.	SHOP	TRAMMEL
168	LOAD CELL (HYDRAULIC SCALE)	METALWKG 2	METZE, R.	SHOP	LOAD CELL	HYDRAULIC
148	QUICK AND EASY ELECTRIC FURNACE	METALWKG 2	CORTNER, R.	FOUNDRY	FURNACE	ELECTRIC
122	ONE HANDED DEPTH GAGE	METALWKG 2	DUBOSKY, E.	SHOP	GAGE	DEPTH
219	KNIFE BLADE FROM SCRAP	METALWKG 2	ACKER, STEVE	HOBBY	KNIFE
24	SHOWER HEAD	METALWKG 2	MARX, A.	HOBBY	SHOWER HEAD
210	METAL SPINNING	METALWKG 2	DUCLOS, PHILIP	HOBBY	SPINNING
218	SPINNING YOUR OWN OILCAN	METALWKG 2	DUCLOS, PHILIP	HOBBY	SPINNING	OILCAN
222	TWO HEADED BOLT	METALWKG 2	FEAR, J.	HOBBY	TWO HEADED BOLT
238	EIGHT TUBE WIND CHIMES	METALWKG 2	HOWARD, T.F.	HOBBY	WIND CHIMES
126	SMALL SHEET METAL BRAKE	METALWKG 2	WILSON, G.	SHOP	BRAKE	SHEET METAL
166	WIRE CLAMPS - A UNIQUE THIRD HAND	METALWKG 2	JOHNSON, W.A.	SHOP	CLAMPS	WIRE
68	BALL TURNING FIXTURE	METALWKG 2	VREELAND, D.	LATHE	BALL TURNER	POWERED
54	ATLAS LATHE, BED EXTENSION	METALWKG 2	METZE, R.	LATHE	BED EXTENSION
152	HOT TANK	METALWKG 2	HUTTINGER, R.L.	SHOP	HOT TANK
18	WORM DRIVES	METALWKG 2	OLSON, J.	SHOP	WORM DRIVES
106	SOFT FACED HAMMER	METALWKG 2	BOWSER, M.B.	SHOP	HAMMER	SOFT FACED
73	MYFORD LATHE, ADJUSTABLE POP-STOP	METALWKG 2	YOUNG, M.	LATHE	POP-STOP	MYFORD
86	ECONOMICAL X-AXIS READOUT	METALWKG 2	MUELLER, F.	MILL	READOUT	X-AXIS
44	QUICKCHANGE IMPROVEMENT, GRIZZLY	METALWKG 2	FELLER, E.T.	LATHE	QUICKCHANGE	IMPROVEMENT
81	Z-AXIS DOWNFEED, MILL/DRILL	METALWKG 2	MUELLER, F.	MILL	DOWNFEED	Z-AXIS
78	SMALL BORING HEAD	METALWKG 2	HEDIN, R.S.	MILL	BORING	HEAD
38	SPINDLE DRIVING HANDLE, EMCO 2	METALWKG 2	PAULE, R.	LATHE	HANDLE	SPINDLE
2	TAPER SHANK TURNING	METALWKG 2	JOHNSON, D. E.	LATHE	TAPER	TAPER
95	VARIATIONS ON A BUTTON V-BLOCK	METALWKG 2	WAGNER, W.S.	MILL	V-BLOCK	BUTTON
61	CARRIAGE LOCK WRENCH	METALWKG 2	GASCOYNE, J.B.	LATHE	WRENCH	CARRIAGE LOCK
13	MILLING POCKETS	METALWKG 2	MADISON, J.	MILL	TECHNIQUE
88	COAXIAL INDICATOR	METALWKG 2	METZE, R.	MILL	INDICATOR	COAXIAL
6	MILL/DRILL REPAIR	METALWKG 2	ACKER, STEVE	MILL	REPAIR	GIB
52	TAILSTOCK TAP & DIE HOLDER	METALWKG 2	MCHENRY, R.	LATHE	TAILSTOCK	TAP HOLDER
32	ATLAS 6" LATHE RISERS	METALWKG 2	METZE, R.	LATHE	RISER	ATLAS 6"
116	DIE STOCK PLUS	METALWKG 2	WRIGHT, T.	SHOP	DIE STOCK
76	ZERO SET MICROMETER DIAL	METALWKG 2	GROSJEAN, W.C.	LATHE	MICROMETER DIAL	ZERO SET
64	LATHE RACK REPAIR	METALWKG 2	WRIGHT, T.	LATHE	REPAIR	RACK
96	TIPS AND TRICKS	METALWKG 2	LAMANCE, T.	MILL	TIPS
90	SPINDLE LOCK	METALWKG 2	TORGERSON, R.	MILL	LOCK	SPINDLE
7	BAND SAW BLADE BRAZING	METALWKG 2	HEDIN, R.S.	SAW	BANDSAW	BLADE brazing
56	KNURLING TOOL	METALWKG 2	JORGENSON, D.	LATHE	KNURLING	SINGLE
39	5C COLLET FIXTURE TAILSTOCK	METALWKG 2	ACKER, STEVE	LATHE	TAILSTOCK	FIXTURE
94	MILLING CUTTER ARBOR	METALWKG 2	STRAIGHT, J.W.	MILL	ARBOR
	BALL TURNING FIXTURE	MWN	TUCKWOOD	LATHE	BALL TURNER	INTERNET
	Q/C TOOLPOST	MWN	STEVENSON, J.	LATHE	TOOLPOST	QUICKCHANGE
	WIGGLER	MWN	REHMUS, M.	MILL	WIGGLER	TECHNIQUE
	CENTERFINDER	MWN	REHMUS, M.	MILL	CENTERFINDER	TECHNIQUE
	BALL TURNING FIXTURE	MWN	TUCKWOOD	LATHE	RADIUS	INTERNET
41	SEGMENTED BELTS	PIM 9204	SEE C:/HSM/BELTS.TXT	SHOP	BELTS	SEGMENTED	92	204
6	QUICK CHANGE GEARBOX (6" ATLAS)	PIM 9212	PETTIT, G. A.	LATHE	QUICKCHANGE	CHANGEGEAR	92	212
31	COUNTERBORE	PIM 9212	WORZALA, J.	DRILL	COUNTERBORE		92	212
21	DOUBLE SIDED TAPE	PIM 9212	MADISON ,J.	SHOP	TECHNIQUE	CLAMPING	92	212
6	ATLAS 6" QUICK CHANGE GEARBOX	PIM 9212	PETTIT, G. A.	LATHE	QUICKCHANGE	CHANGEGEAR	92	212
28	THREE PHASE CONVERTER	PIM 9212	ROBERTSON, J.C.	SHOP	CONVERTER	3 PHASE	92	212
31	COUNTERBORE, ADJUSTABLE	PIM 9212	WORZALA, J.	MILL	DRILL	COUNTERBORE	92	212
31	COUNTERBORE, ADJUSTABLE	PIM 9212	WORZALA, J.	LATHE	DRILL	COUNTERBORE	92	212
4	BORING BAR HOLDER	PIM 9212	JOHNSON, D.E.	LATHE	BORING BAR	TOOLING	92	212
12	LEVER TAILSTOCK FEED	PIM 9302	WRIGHT, T.	LATHE	TAILSTOCK	LEVER	93	202
20	OVERHANG	PIM 9302	KEET, A.	SHOP	CHATTER	STIFFNESS	93	202
4	TRIPOD BALL HEAD	PIM 9302	WILSON, G.	HOBBY	TRIPOD	BALL HEAD	93	202
31	INDEX - 1992	PIM 9302	RICE, J. (EDITOR)	INDEX	1992	PIM	93	202
28	CUTTING FLUID DISPENSER	PIM 9302	YAMAMOTO, M. T.	SHOP	DISPENSER	CUTTING FLUID	93	202
10	AUTOMATIC CENTER PUNCH	PIM 9302	DUBOSKY, E.	SHOP	CENTERPUNCH	AUTOMATIC	93	202
24	LATHE CARRIAGE STOP	PIM 9302	BOROWICZ, T.	LATHE	STOP	CARRIAGE	93	202
14	SURFACE FINISHES	PIM 9304	MADISON, J.	SHOP	TECHNIQUE		93	204
29	CUT-OFF BLADE	PIM 9304	DAVIS, L.	LATHE	CUTTOFF	CUTOFF	93	204
30	GRADUATED COLLARS (COMPUTERIZED)	PIM 9304	SMITH, W.R.	SHOP	COLLARS	GRADUATED	93	204
12	FACEPLATES	PIM 9304	MAYKOSKI, T.	LATHE	FACEPLATE	BUILDING	93	204
26	COUNTERSINKS	PIM 9304	JOHNSON, D.E.	LATHE	COUNTERSINK	BUILDING	93	204
21	SURFACE PLATE (MIRROR)	PIM 9304	SEXTON, T.	SHOP	SURFACE PLATE	MIRROR	93	204
20	HEX EXTENSION	PIM 9304	MCDOWELL, T.	SHOP	HEXHEAD	EXTENSION	93	204
4	MILLING/DRILLING SPINDLE	PIM 9304	SMITH, W.R.	DRILL	SPINDLE		93	204
26	COUNTERSINKS	PIM 9304	JOHNSON, D.E.	MILL	COUNTERSINK	BUILDING	93	204
28	CHIP REMOVAL	PIM 9304	CHRISTOPHERSON, A.M.	SAW	CHIPS	REMOVAL	93	204
22	BORING BARS	PIM 9304	LOFQUIST, A.	LATHE	BORING BAR	TOOLING	93	204
18	STUD REPAIR	PIM 9304	SCHONHER, S.	SHOP	TECHNIQUE	STUD REPAIR	93	204
26	COUNTERSINKS	PIM 9304	JOHNSON, D.E.	SHOP	COUNTERSINK	BUILDING	93	204
26	CENTERED CROSS HOLES	PIM 9306	KOVAL, R.	DRILL	CROSS-HOLES	DRILLING	93	206
13	BAND SAW CONSTRUCTION	PIM 9306	STRAUSS, M.	SAW	BANDSAW	BUILDING	93	206
28	BAND SAW DOWN FEED	PIM 9306	STRAMPE, S.	SAW	BANDSAW	FEED	93	206
30	MULTI TOOLPOST	PIM 9306	BARBOUR, J.	LATHE	TOOLPOST	MULTI	93	206
32	THINWALL BORING	PIM 9306	TURNER, J.	LATHE	BORING	THINWALL	93	206
4	COLLET ADAPTER	PIM 9306	JONES, B.	LATHE	COLLET	CHUCK	93	206
12	CLAMP	PIM 9308	PATRICK, R.	SHOP	CLAMP		93	208
31	WELDING HINTS	PIM 9308	ACKER, STEVE	SHOP	WELDING	HINTS	93	208
29	SOFT JAWS	PIM 9308	JOHNSON, D.E.	SHOP	SOFT JAWS	BUILDING	93	208
26	TRUING THE COLUMN (MILL/DRILL)	PIM 9308	COOPER, J.A.	MILL	COLUMN	TRUING	93	208
30	THREADS, INTERNAL	PIM 9308	GRADY, R.	LATHE	THREADING	INTERNAL	93	208
4	TAILSTOCK CLAMP	PIM 9308	FRANCISCO, H.	LATHE	TAILSTOCK	CLAMP	93	208
17	DRO UNDER $125	PIM 9308	MARTIN, G.	MILL	DRO	BUILDING	93	208
17	DRO UNDER $125	PIM 9308	MARTIN, G.	LATHE	DRO	BUILDING	93	208
6	TAPPER	PIM 9310	MASON, H.	SHOP	TAPPER		93	210
31	ROUNDING SQUARE STOCK	PIM 9310	REICHART, J.W.	LATHE	TECHNIQUE	TURNING	93	210
3	CENTERFINDER	PIM 9310	LINCOLN, W.A.	LATHE	CENTERFINDER	DIAL	93	210
30	DRILL HOLDER	PIM 9312	JOHNSON, D.E.	LATHE	DRILL	TAILSTOCK	93	212
24	ASIAN MACHINERY	PIM 9312	SEXTON, T.	LATHE	BUYING		93	212
23	CHIPBREAKER	PIM 9312	MUELLER, W.B.	MILL	BIT	GRINDING	93	212
4	METAL STAMPER	PIM 9312	WILSON, G.	SHOP	STAMPER	METAL	93	212
14	TABLE FIXTURES	PIM 9312	MADISON, J.	MILL	FIXTURES	TABLE	93	212
23	CHIPBREAKER	PIM 9312	MUELLER, W.B.	LATHE	BIT	GRINDING	93	212
16	HEIGHT GAGE (ONE INCH)	PIM 9312	KUBOWWSKY, H.	SHOP	GAGE	HEIGHT	93	212
9	BELT GRINDER	PIM 9312	CROW, A.	GRINDER	BELT	BUILDING	93	212
20	PLASTIGAGE	PIM 9312	GRABHORN, M.	SHOP	MEASURING	PLASTIC	93	212
31	TAP WRENCH	PIM 9312	BLYSTONE, D.	SHOP	TAP	WRENCH	93	212
15	CHUCK, TWO JAW	PIM 9402	SCHULZINGER, J.	LATHE	CHUCK	2 JAW	94	202
18	BUBBLE PROTRACTOR	PIM 9402	WILSON, G.	SHOP	PROTRACTOR		94	202
28	MACHINEABLE ANGLES	PIM 9402	MADISON, J.	MILL	ANGLES		94	202
24	HARDENED WASHER	PIM 9402	ACKER, STEVE	SHOP	WASHER	HARDENED	94	202
30	COLLET ADAPTER	PIM 9402	PAQUAY, A.	LATHE	COLLET	ADAPTER	94	202
26	PENCIL SURFACE GAGE	PIM 9402	GASCOYNE, J.B.	SHOP	GAGE	HEIGHT	94	202
22	CLAMPS	PIM 9402	CROW, A.	SHOP	CLAMP		94	202
4	TRIPOD ELIMINATOR	PIM 9402	MASON, H.	HOBBY	TRIPOD	ELIMINATOR	94	202
31	INDEX - 1993	PIM 9402	RICE, J. (EDITOR)	INDEX	1993	PIM	94	202
4	HEIGHT GAGE	PIM 9404	MUELLER, W.B.	SHOP	GAGE	HEIGHT	94	204
16	TAPER ATTACHMENT	PIM 9404	PETTIT, G. A.	LATHE	TAPER	ATTACHMENT	94	204
24	HOLDDOWN DEVICE	PIM 9404	STRAIGHT, J.W.	DRILL	HOLD DOWN		94	204
21	CORNER LOCATOR	PIM 9404	MADISON, J.	SHOP	CORNER LOCATOR	LAYOUT	94	204
26	BLACKSMITHING	PIM 9404	SMITH, D.	SHOP	BLACKSMITHING		94	204
31	MANDREL	PIM 9404	JOHNSON, D.E.	LATHE	MANDREL		94	204
30	TAP WRENCH GUIDE/DEPTH GUIDE	PIM 9404	SPARBER, R.G.	SHOP	TAP	GUIDE	94	204
32	MOTOR CONTROL, SINGLE PHASE	PIM 9404	STROH, R.	SHOP	MOTOR	REVERSING	94	204
24	SPEED REDUCER GRIZZLY 8X18	PIM 9406	BARBOUR, J.	LATHE	SPEED	SPEED REDUCER	94	206
4	TOOL RACK (CAROUSEL)	PIM 9406	WILSON, G.	LATHE	RACK	TOOLHOLDER	94	206
8	MILLING ATTACHMENT	PIM 9406	BOROWICZ, T.	LATHE	MILLING	ATTACHMENT	94	206
32	MILLING TABLE	PIM 9406	FAIREY, B.	MILL	TABLE		94	206
3	ODD-COUNT THREADS (27 TPI)	PIM 9406	JAMES, C.	LATHE	THREADING	ODD-COUNT (27)	94	206
28	PARTOFF BLADE HOLDER (REAR)	PIM 9406	YAMAMOTO, M. T.	LATHE	TOOL HOLDER	PARTING TOOL	94	206
28	V-BLOCKS IN A VISE	PIM 9408	MADISON, J.	SHOP	V-BLOCK	USE OF	94	208
24	MACHINE GROUNDING (ELECTRICAL)	PIM 9408	ACKER, STEVE	SHOP	ELECTRICAL	GROUNDING	94	208
4	POWER FEED FOR MILL/DRILL	PIM 9408	KRAEMER, J.	MILL	POWER FEED	TABLE	94	208
30	MOTOR CONTROL (REVERSING)	PIM 9408	STROH, R.	SHOP	MOTOR	REVERSING	94	208
26	SHOP GADGETS	PIM 9408	VREELAND, D.	SHOP	GADGETS		94	208
16	INDEX FOR LATHE	PIM 9408	THOMPSON, J.R.	LATHE	INDEXING		94	208
27	CARRIAGE STOP FOR MILLING MACHINES	PIM 9408	RICE, R.	MILL	CARRIAGE	STOP	94	208
13	BORING BARS	PIM 9408	HEDIN, R.S.	LATHE	BORING BAR		94	208
21	SHOPTASK MODIFICATIONS	PIM 9408	SCHWEINFURTH, L.	LATHE	SHOPTASK	MODIFICATIONS	94	208
32	CENTERFINDER PROBES	PIM 9408	GOLDING, M.	MILL	CENTERFINDER	PROBES	94	208
32	ATLAS HEAD SPINDLE	PIM 9408	HIBBARD, W.	LATHE	SPINDLE	ATLAS	94	208
16	DIVIDING HEAD, USE THEREOF	PIM 9410	MCLEAN, FRANK	SHOP	DIVIDING HEAD		94	210
26	NEW USE FOR OLD TOOLS	PIM 9410	ERNEST, J.F.	SHOP	RECLAIMING TOOLS		94	210
24	AIR COMPRESSOR	PIM 9410	HESSE, J.	SHOP	AIR COMPRESSOR		94	210
22	MOTOR STARTER	PIM 9410	HESSE, J.	SHOP	MOTOR	THREE PHASE	94	210
30	THREADING DIAL	PIM 9410	BARBOUR, J.	LATHE	THREADING	DIAL	94	210
28	SHERLINE MOTOR DRIVE MODIFICATION	PIM 9410	HABERMAN, W.	MILL	DRIVE	MODIFICATION	94	210
3	LATHE DOG	PIM 9410	DRAYSON, D.A.	LATHE	DOG		94	210
4	MILLING/DRILLING SPINDLE	PIM 9410	SMITH, W.R.	LATHE	MILLING	SPINDLE	94	210
28	SHERLINE MOTOR DRIVE MODIFICATION	PIM 9410	HABERMAN, W.	LATHE	DRIVE	MODIFICATION	94	210
28	SHERLINE MILL MODIFICATIONS	PIM 9412	UPSHUR, H.B.	MILL	SHERLINE	MODIFICATIONS	94	212
30	SANDBLASTING CABINET	PIM 9412	LAVENUTA, F.	SHOP	SANDBLAST	CABINET	94	212
19	SPINDLE CLAMP (MILL/DRILL)	PIM 9412	LIFSON, W.	MILL	SPINDLE CLAMP		94	212
4	LAST PASS INDICATOR HOLDER	PIM 9412	WILSON, G.	LATHE	INDICATOR	INDICATOR HOLDER	94	212
12	ARBOR PRESSES	PIM 9412	METZE, R.	SHOP	ARBOR PRESS		94	212
26	CLAMPSET (MILLING TABLE)	PIM 9412	MADISON, J.	MILL	CLAMP		94	212
22	WINDING A COIL (MAGNETIC CHUCK)	PIM 9412	HESSE, J.	SHOP	COIL WINDING		94	212
8	STEPPER MOTOR DRIVE	PIM 9412	DAHLIN, T.	CNCA1	STEPPER MOTOR	DRIVE	94	212
29	RECTANGULAR ADAPTER BLOCKS	PIM 9412	PIPER, P.	LATHE	CHUCK	ADAPTERS	94	212
17	TOOLHOLDER, OPENSIDED	PIM 9502	IIAMES & TURNER	LATHE	TOOL HOLDER		95	202
12	THICKNESS CALIPER	PIM 9502	CROW, A.	SHOP	CALIPER	THICKNESS	95	202
32	TOLERANCES	PIM 9502	MADISON, J.	SHOP	DIMENSIONS	TOLERANCES	95	202
20	SPHERE MACHINING	PIM 9502	JENKINS, L.J.	LATHE	BALLS	SPHERE	95	202
24	EDGEFINDER	PIM 9502	ROSCOE, L.L.	MILL	EDGEFINDER		95	202
44	INDEX - 1994	PIM 9502	RICE, J. (EDITOR)	INDEX	1994	PIM	95	202
4	BAND SAW BLADE GRINDER	PIM 9502	LINCOLN, W.A.	SAW	BANDSAWBLADE	GRINDER	95	202
28	WATCH REPAIR	PIM 9502	SMITH, W.R.	SHOP	WATCHES	REPAIR	95	202
24	RADII DUPLICATION	PIM 9504	ROSCOE, L.L.	LATHE	TOOL BITS	FORM	95	204
14	CASTLE NUTS	PIM 9504	SCHULZINGER, J.	SHOP	FASTENER	CASTLENUT	95	204
21	LATHE ADAPTERS	PIM 9504	JONES, B.	LATHE	ADAPTERS		95	204
27	MOVING ON A BUDGET	PIM 9504	TITUS, D.	SHOP	MOVING		95	204
33	BUMPINGOUT	PIM 9504	BLANDFORD, P.	LATHE			95	204
30	HOLE PUNCH	PIM 9504	BRUCE, F.	SHOP	HOLES	HOLEPUNCH	95	204
4	PANTOGRAPH	PIM 9504	WILSON, G.	SHOP	PANTOGRAPH		95	204
18	POWER HACKSAW	PIM 9504	DEAN, J.	SAW	HACKSAW		95	204
43	SHERLINE HANDWHEEL	PIM 9504	SEWELL, W.L.	MILL	SHERLINE	HANDWHEEL	95	204
35	SHERLINE TOOLS	PIM 9504	ATKINSON, C.	LATHE	SHERLINE	REPORT	95	204
32	FACEPLATE REMOVAL	PIM 9504	BLANDFORD, P.	LATHE	FACEPLATE	REMOVAL	95	204
40	SCOPE MOUNT ALIGNMENT	PIM 9504	ACKER, STEVE	GUNS	SCOPEMOUNTS		95	204
34	POWER FEED FOR MILL/DRILL	PIM 9504	KRAEMER, J.	MILL	POWER FEED	MODIFICATION	95	204
4	POWER FEED FOR MILL/DRILL	PIM 9506	LINCOLN, W.A.	MILL	POWER FEED	TABLE	95	206
22	SHOP BENCH	PIM 9506	JOLY, D.	SHOP	BENCH		95	206
36	MEASUREMENT PLATE	PIM 9506	ACKER, STEVE	GUNS	CHAMBERING PLATE		95	206
20	ATLAS 6" LATHE, MODIFICATIONS	PIM 9506	BROWN, M.	LATHE	ATLAS 6"	MODIFICATIONS	95	206
31	INDICATING & PICKING UP PART ONE	PIM 9506	MADISON, J.	SHOP	TECHNIQUE	INDICATING 1	95	206
38	PALMGREN ANGLE VISE	PIM 9506	BARBOUR, J.	MILL	ANGLE VISE		95	206
28	LIVE CENTER	PIM 9506	BARBOUR, J.	LATHE	LIVE CENTER		95	206
26	CREATIVITY	PIM 9506	WILSON, G.	SHOP			95	206
24	TOOLHOLDER	PIM 9506	CREWS, E.W.	LATHE	TOOL HOLDER		95	206
32	BUSHING JIG (1911 BARREL)	PIM 9508	ACKER, STEVE	GUNS	BARREL BUSHING		95	208
28	BELT SLITTER	PIM 9508	SMELTZER, P.	SHOP	BELT SLITTER		95	208
34	ALIGNING A LATHE	PIM 9508	WELLCOME, S.G	LATHE	ALIGNMENT		95	208
4	SMALL SHAPER ("ZIPPY")	PIM 9508	SEXTON, T.	SHAPER	ZIPPY, MK1		95	208
22	MACHINERY OIL GUN	PIM 9508	SOKOL, J.	SHOP	OIL GUN		95	208
17	FARRIER'S FORGE	PIM 9508	HUARD, C.	SHOP	FORGE		95	208
26	ELECTRONIC EDGEFINDER	PIM 9508	PELLIZZARI, F.A.	MILL	EDGEFINDER	ELECTRONIC	95	208
36	INDICATING & PICKING UP PART TWO	PIM 9508	MADISON, J.	SHOP	TECHNIQUE	INDICATING 2	95	208
43	MILL/DRILL ALIGNMENT	PIM 9508	SPARBER, R.G.	MILL	ALIGNMENT		95	208
23	END MILL SHARPENING	PIM 9510	COOPER, J.A.	GRINDER	SHARPENING	MILLS	95	210
23	MILL SHARPENING JIG	PIM 9510	COOPER, J.A.	MILL	SHARPENING	JIG	95	210
34	INDICATING & PICKING UP PART THREE	PIM 9510	MADISON, J.	SHOP	TECHNIQUE	INDICATING 3	95	210
28	DIAL CALIPER MOUNT	PIM 9510	LINCOLN, W.A.	SHOP	CALIPER	MOUNTING	95	210
31	SHERLINE DRILL PRESS VISE	PIM 9510	TRACY, C.	SHOP	VISE		95	210
16	TURN-O-MILL	PIM 9510	MILLER, R.B.	MILL	CONVERSION		95	210
4	BLOWGUN	PIM 9510	JONES, B.	SHOP	AIR BLOWGUN		95	210
32	INSTALLING SIGHT BEADS	PIM 9510	ACKER, STEVE	GUNS	SIGHTS	MOUNTING	95	210
38	INDICATING & PICKING UP PART FOUR	PIM 9512	MADISON, J.	SHOP	TECHNIQUE	INDICATING 4	95	212
34	ANGLE PLATE, ADJUSTABLE	PIM 9512	GEISLER, F.	SHOP	ANGLE PLATE	ADJUSTABLE	95	212
33	POWER FEED FOR MILL/DRILL	PIM 9512	REICHART, W.	MILL	POWER FEED	TABLE	95	212
40	POWER FEED FOR MILL/DRILL	PIM 9512	METZE, R.	MILL	POWER FEED	TABLE	95	212
36	BOLT HANDLE	PIM 9512	ACKER, STEVE	GUNS	BOLT HANDLE	CUSTOM	95	212
22	PNEUMATIC HAMMER	PIM 9512	CALVER, R.	SHOP	PNEUMATIC HAMMER		95	212
6	MINI-MILL ATTACHMENT	PIM 9512	WILSON, G.	MILL	ATTACHMENT	MINI	95	212
26	POWER FEED FOR MILL/DRILL	PIM 9512	LINCOLN, W.A.	MILL	POWER FEED	VERTICAL	95	212
4	ATKINSON CYCLE ENGINE	PIM 9602	TEAGUE, A.L.	ENGINE	ATKINSON CYCLE		96	202
23	JERK PULLER	PIM 9602	CROW, A.	SHOP	VISE-GRIP PULLER		96	202
34	MILLING FIXTURE	PIM 9602	ACKER, STEVE	SHOP	MILLING FIXTURE		96	202
26	FINE DOWNFEED	PIM 9602	TUMELSON, J.	MILL	DOWNFEED		96	202
28	PHASE CONVERTER	PIM 9602	EVANS, R.W.	SHOP	3 PHASE CONVERTER		96	202
36	WISDOM TECHNIQUES	PIM 9602	MADISON, J.	SHOP	TECHNIQUE		96	202
32	WORKSTANDS	PIM 9602	CROSBY, D.	SHOP	WORKSTANDS		96	202
41	POWER FEED FOR MILL/DRILL	PIM 9602	PIERCE, P.E.	MILL	POWER FEED	TABLE	96	202
30	R8 COLLET HOLDER	PIM 9604	BIDDLE, H.T.	LATHE	COLLET	R8 HOLDER	96	204
35	PINCHED FINGER	PIM 9604	WULFF, J.E.	LATHE	HANDLES		96	204
34	SMOOTH HANDLES	PIM 9604	EVERS, H.	SHOP	HANDLES		96	204
36	CHUCK CENTER	PIM 9604	GRADY, R.	LATHE	CENTER	CHUCK	96	204
31	LATHE ALIGNMENT	PIM 9604	HUFFAKER, R.	LATHE	ALIGNMENT		96	204
22	LATHE MILL	PIM 9604	FOSTER, C.	MILL	LATHE		96	204
16	TURNING LONG TAPERS	PIM 9604	JOHNSON, D.E.	LATHE	TAPER	TURNING	96	204
45	INDEX - 1995	PIM 9604	RICE, J. (EDITOR)	INDEX	1995	PIM	96	204
10	HOLE LOCATING	PIM 9604	ROSCOE, L.L.	MILL	HOLE LOCATING		96	204
38	PISTOL HAMMER WORK	PIM 9604	ACKER, STEVE	GUNS	PISTOL HAMMER		96	204
25	KEYWAY SHAPING	PIM 9604	LEAFE, M.K.	SHAPER	KEYWAY		96	204
19	LATHE BIT GRINDING JIG	PIM 9604	KEELY, A.W.	GRINDER	LATHE BIT	SHARPENING	96	204
4	TRIPOD HEAD	PIM 9604	WILSON, G.	PROJECT	TRIPOD HEAD		96	204
37	METRIC THREAD CUTTING	PIM 9604	GIBSON, A.	LATHE	METRIC THREADCUTTING		96	204
14	MILL RESTORATION	PIM 9604	SCHARPLAZ, J.D.	MILL	RESTORATION	HAND	96	204
40	TRIANGULAR SCALE	PIM 9606	LAMANCE, T.	SHOP	TRIANGULAR SCALE		96	206
38	REAMER TIPS	PIM 9606	MADISON, J.	SHOP	REAMER TIPS		96	206
32	ANAEROBIC ADHESIVES	PIM 9606	KRAEMER, T.	SHOP	ADHESIVES	ANAEROBIC	96	206
30	BALANCING WAYS	PIM 9606	BARBOUR, J.	SHOP	BALANCING WAYS		96	206
22	TOOL HEIGHT INDICATOR	PIM 9606	NYMAN, P.	LATHE	TOOL HEIGHT	INDICATOR	96	206
36	RIFLE CROWN, CUTTING	PIM 9606	ACKER, STEVE	GUNS	RIFLE CROWN		96	206
26	CHUCK, 4 JAW, TECHNIQUES	PIM 9606	LINCOLN, W.A.	LATHE	CHUCK	4-JAW CHUCK	96	206
20	POWER FEED FOR MILL/DRILL	PIM 9606	HALLIGAN, H.	MILL	POWER FEED	TABLE	96	206
4	TOOL & CUTTER GRINDER	PIM 9606	BROOKS, D.	GRINDER	T & C		96	206
20	CLUTCH, LATHE	PIM 9608	VAN DUYN, L.	LATHE	CLUTCH		96	208
34	BORING BLOCK	PIM 9608	SOHL, A.	LATHE	BORING HEAD		96	208
13	TOOLMAKER'S BUTTONS	PIM 9608	JOHNSON, D.E.	SHOP	TOOLING	BUTTONS	96	208
14	LIFE WITH A MILL/DRILL	PIM 9608	COLLINS, M.	MILL	TECHNIQUE		96	208
37	SPINDLE CLAMPS	PIM 9608	WATERS. R.	MILL	SPINDLE CLAMP		96	208
4	OLD MILLING MACHINES	PIM 9608	SEXTON, T.	MILL	RESTORING		96	208
28	KEYSEAT CUTTER	PIM 9608	HESTER, D.	SHAPER	KEYSEAT CUTTER		96	208
19	POWER FEED FOR MILL/DRILL	PIM 9608	METZE, R.	MILL	POWER FEED	TABLE	96	208
32	ENLARGING EJECTION PORT (1911)	PIM 9608	ACKER, STEVE	GUNS	EJECTION PORT	ENLARGING	96	208
4	Q-C TOOLPOST	PIM 9610	PILESKI, M.	LATHE	TOOLPOST		96	210
35	WHY A LAYOUT	PIM 9610	MADISON, J.	SHOP	LAYOUT		96	210
30	TAP BUSTER HEAD	PIM 9610	HESSE, J.	SHOP	TAP	BUSTER	96	210
9	SHADOWGRAPH	PIM 9610	BUTTERICK, R.	SHOP	COMPARATOR		96	210
22	WHEEL BALANCER	PIM 9610	PETERSEN, B.	SHOP	WHEEL BALANCER	TIRE	96	210
28	TURNING TAPERS	PIM 9610	REYNOLDS, J.	LATHE	TAPER	TURNING	96	210
40	FRONT SIGHT DOVETAIL	PIM 9610	ACKER, STEVE	GUNS	FRONT SIGHT	DOVETAIL	96	210
29	TELESCOPE	PIM 9612	EDWARDS, W.R.	SHOP	TECHNIQUE		96	212
4	BALL HANDLES	PIM 9612	LINCOLN, W.A.	LATHE	BALL HANDLES		96	212
16	TAPPER	PIM 9612	BOLANTE, J.	SHOP	TAPPER		96	212
22	MEASURING ANGLES	PIM 9612	MEISTER, H. J.	SHOP	MEASURING	ANGLES	96	212
34	WHY A LAYOUT	PIM 9612	MADISON, J.	SHOP	LAYOUT		96	212
18	MULTI-PATTERNS	PIM 9612	DRAYSON, D.A.	SHOP	PATTERNS		96	212
20	MACHINING LARGE SURFACES	PIM 9612	COOPER, J.A.	MILL	LARGE SURFACES		96	212
11	SPINDLE CLAMPS	PIM 9612	WRIGHT, R.	MILL	SPINDLE CLAMP		96	212
4	BALL HANDLES	PIM 9612	LINCOLN, W.A.	GRINDER	BALL HANDLES	QUORN	96	212
4	BALL HANDLES	PIM 9612	LINCOLN, W.A.	SHOP	BALL HANDLES		96	212
32	SIGHT HOLDING FIXTURES	PIM 9612	ACKER, STEVE	GUNS	SIGHT HOLDING FIXTURES		96	212
12	SWARF LIFTER - "ZAPPO"	PIM 9612	SEXTON, T.	SHOP	SWARF	MAGNET	96	212
30	LAYOUT	PIM 9702	MADISON, J.	SHOP	TECHNIQUE	LAYOUT	97	202
27	TOOL BLOCK CAROUSEL	PIM 9702	PILESKI, M.	LATHE	TOOL BLOCK	CAROUSEL	97	202
40	INDEX - 1996	PIM 9702	RICE, J. (EDITOR)	INDEX	1996	PIM	97	202
34	FRONT SIGHT INSTALLATION	PIM 9702	ACKER, STEVE	GUNS	FRONT SIGHT	INSTALLATION	97	202
12	SPINDLE OSCILLATOR	PIM 9702	MUELLER, F.	DRILL	SANDER	OSCILLATING	97	202
4	POWER FEED FOR MILL/DRILL	PIM 9702	COOPER, J.A.	MILL	POWER FEED	TABLE	97	202
32	MEASURING I.D.	PIM 9704	SPARBER, R.G.	SHOP	TECHNIQUE	MEASURING ID	97	204
16	HEAT TREAT FURNACE	PIM 9704	HESSE, J.	SHOP	HEAT TREAT	FURNACE	97	204
34	FIRING PIN HOLES	PIM 9704	ACKER, STEVE	GUNS	FIRING PIN HOLES	MOVING	97	204
40	POWER FEED FOR MILL/DRILL	PIM 9704	DAMON, S.F.	MILL	POWER FEED	TABLE	97	204
27	ROTARY TABLE	PIM 9704	LEUCK,R.	MILL	ROTARY TABLE	SCRAPS	97	204
33	DATING OLD MACHINERY	PIM 9704	BATORY, D	SHOP	DATING TOOLS		97	204
4	GRADUATING TOOL	PIM 9704	SEXTON, T.	LATHE	GRADUATING	TOOLPOST	97	204
24	SPUR GEAR	PIM 9704	HOFF, M.	MILL	GEAR	UNORTHODOX	97	204
12	STEPPER MOTOR DRIVER	PIM 9704	HOOVER, C.A.	MILL	CNC	DRIVER	97	204
30	MEASURING TOOLS	PIM 9704	BARBOUR, J.	SHOP	MEASURING	TOOLS	97	204
12	STEPPER MOTOR DRIVER	PIM 9704	HOOVER, C.A.	CNCA2	LATHE	DRIVER	97	204
36	TRIGGER PINS	PIM 9706	ACKER, STEVE	GUNS	TRIGGER PINS	FITTING	97	206
14	MAGNETIC BASE	PIM 9706	THOMPSON, J.R.	SHOP	MAGNETIC	BASE	97	206
21	CARBIDE CUTTERS	PIM 9706	BRATVOLD, BRIAN	MILL	CARBIDE	CUTTERS	97	206
20	TAILSTOCK LOCK	PIM 9706	GOVUS, STEVE	LATHE	LOCK	TAILSTOCK	97	206
33	EDGE GAGE	PIM 9706	MADISON, J.	MILL	EDGE	GAGE	97	206
4	BOLT & NUTS, SCALE	PIM 9706	HOFF, MIKE	SHOP	BOLTS	NUTS	97	206
21	CARBIDE CUTTERS	PIM 9706	BRATVOLD, BRIAN	LATHE	CARBIDE	CUTTERS	97	206
11	INDEXING ATTACHMENT	PIM 9706	TITUS, D.	LATHE	INDEXING	ATTACHMENT	97	206
32	SHADOWGRAPH LAMP	PIM 9706	BUTTERICK, DICK	SHOP	SHADOWGRAPH	LAMPBASE	97	206
28	WELDING, INERTIA	PIM 9706	HESSE, J.	SHOP	WELDING	INERTIA	97	206
32	PILLARS, RIFLE BEDDING	PIM 9708	ACKER, STEVE	GUNS	BEDDING	PILLARS	97	208
22	KNURLING	PIM 9708	KOVAL, R.	LATHE	KNURLING	CALCUATIONS	97	208
26	FOLLOWER REST	PIM 9708	HOLM, PAUL	LATHE	FOLLOWER	PROJECT	97	208
4	MILLING ATTACHMENT FOR A LATHE	PIM 9708	REYNOLDS, JIM	LATHE	MILLING	ATTACHMENT	97	208
27	POLISHER	PIM 9708	METZE, BOB	LATHE	POLISHER	HOLDER	97	208
28	ALIGNMENT WHEEL	PIM 9708	JOHNSON, NORMAN	MILL	ALIGNMENT	TRAMMING	97	208
26	EQUIPMENT LIGHTS	PIM 9708	HOLM, PAUL	SHOP	LIGHTING	EQUIPMENT	97	208
4	MILLING ATTACHMENT FOR A LATHE	PIM 9708	REYNOLDS, JIM	MILL	MILLING (LATHE)	ATTACHMENT	97	208
40	HYDRAULIC CYLINDERS	PIM 9708	CRAIK, G.	SHOP	IMPORTS		97	208
34	SHOP EQUIPMENT	PIM 9708	MADISON, J.	SHOP	LAYOUT	EQUIPMENT	97	208
31	MAGNETIC BACK	PIM 9708	BROWNE, DONAVAN	SHOP	INDICATOR	BACK	97	208
12	ARBOR PRESS	PIM 9708	IRVIN, H.	SHOP	PRESS	ARBOR	97	208
24	TOOL POST	PIM 9708	DOBIAS, DONALD	LATHE	TOOLPOST	PROJECT	97	208
14	X, Y, STAGE (SHADOWGRAPH)	PIM 9708	BUTTERICK, RICHARD	SHOP	SHADOWGRAPH	X-Y STAGE	97	208
30	EDGEFINDER (ELECTRICAL)	PIM 9708	SPARBER, R.G.	MILL	EDGEFINDER	ELECTRICAL	97	208
31	GASKET CUTTING	PIM 9708	BAEHRE, HERB	SHOP	GASKETS	CUTTING	97	208
22	TAPPING STATION	PIM 9710	PILESKI, MIKE	SHOP	TAPPING	STATION	97	210
26	QUILL STOP, QUICK	PIM 9710	CLAUDE, ROGER	MILL	STOP	QUILL	97	210
4	DIVIDING HEAD (TAIG)	PIM 9710	JEFFREE. TONY	LATHE	DIVIDING HEAD	TAIG	97	210
29	CENTER PUNCH GUIDE	PIM 9710	JOHNSON, BILL	SHOP	CENTER PUNCH	GUIDE	97	210
30	MOVING MILL TABLE	PIM 9710	MADISON, J.	MILL	MILL TABLE	MOVEMENT	97	210
34	LATHE HELPER	PIM 9710	ACKER, STEVE	LATHE	GUNSMITH	FIXTURE	97	210
26	QUILL STOP, QUICK	PIM 9710	CLAUDE, ROGER	DRILL	STOP	QUILL	97	210
16	INDEX, LATHE	PIM 9710	LETZRING, NORMAN	LATHE	INDEXING	CRANK	97	210
29	GRASPING GROOVES 45ACP	PIM 9712	ACKER, STEVE	GUNS	GROOVES	GRASPING	97	212
18	SHOP HEALTH	PIM 9712	HANSON, WAYNE	SHOP	SAFETY		97	212
32	TOUGH TOOLS	PIM 9712	MADISON, J.	MILL	TOOLING		97	212
4	MICR0 DRILL PRESS	PIM 9712	LOOP, PAT	DRILL	DRILL PRESS	MICRO	97	212
32	TOUGH TOOLS	PIM 9712	MADISON, J.	LATHE	TOOLING		97	212
15	STOPS, SHERLINE MILL	PIM 9712	ATKINSON, TRACY	MILL	SHERLINE	STOPS	97	212
24	UNIMAT ACCESSORIES	PIM 9712	HAUSER, JAMES	LATHE	UNIMAT	ACCESSORIES	97	212
26	RANDOM ORBITAL SANDER	PIM 9712	CROW, ART	SANDER	ORBITAL	CONVERSION	97	212
13	POWER FEED, MILL/DRILL TABLE	PIM 9802	PATTERSON, FRED V.	MILL	POWER FEED	TABLE	98	202
32	TURNING TOOLS, CARBIDE	PIM 9802	MADISON, JAMES	MILL	TOOLS	CARBIDE	98	202
18	LATHE IMPROVEMENT, CRAFTSMAN 109 SERIES	PIM 9802	WEIGHTMAN, LIONEL	LATHE	CRAFTSMAN	IMPROVEMENTS	98	202
4	RACK CUTTING	PIM 9802	SEXTON, TERRY	LATHE	RACK	CUTTING	98	202
31	INDICATOR HOLDER	PIM 9802	EVERS, HOWARD W.	SHOP	INDICATOR	HOLDER	98	202
32	TURNING TOOLS, CARBIDE	PIM 9802	MADISON, JAMES	LATHE	TOOLS	CARBIDE	98	202
14	TOOLPOST, REAR (ATLAS 6")	PIM 9802	GASCOYNE, JOHN B.	LATHE	TOOLPOST	REAR	98	202
42	INDEX - 1997	PIM 9802	RICE, J. (EDITOR)	INDEX	1997		98	202
28	SCOPE MOUNT, DRILLING & TAPPING	PIM 9802	ACKER, STEVE	GUNS	SCOPES	MOUNTING	98	202
44	ANOTHER MAN'S TREASURE	PIM 9804	PIERCE, PAUL E.	END NOTES	COMMENT		98	204
4	SAWFEED	PIM 9804	REYNOLD, JIM	SAW	FEED	HYDRAULIC	98	204
34	BARREL BORE, CENTERING	PIM 9804	ACKER, STEVE	GUNS	BARREL	CENTERING	98	204
20	CARRIAGE STOP, AUTOMATIC	PIM 9804	BADGER, EDWARD	LATHE	STOP, CARRIAGE	AUTOMATIC	98	204
37	POWER DRIVE, LATHE CHUCK	PIM 9804	SOUTHWICK, F.D.	LATHE	CHUCK	POWER DRIVE	98	204
32	TOOL POST GRINDER	PIM 9804	HANSON, WAYNE	GRINDER	TOOLPOST		98	204
32	TOOL POST GRINDER	PIM 9804	HANSON, WAYNE	LATHE	GRINDER	TOOLPOST	98	204
36	TAP CENTER	PIM 9804	HALLWARD, PETER	SHOP	TAP	CENTER	98	204
30	VISEJACK	PIM 9804	HASBROUCK, RAY	SAW	VISE	JACK	98	204
16	DIE MAKER'S BUTTONS	PIM 9804	THOMPSON, JACK	SHOP	LOCATING	BUTTONS	98	204
28	HEAD LOCK, RONG-FU	PIM 9804	EVERS, HOWARD	MILL	HEADLOCK	RONG-FU	98	204
24	DRIP COOLANT SYSTEM	PIM 9804	NOLAN, PETER	LATHE	COOLANT	DRIP	98	204
27	CROSS SLIDE NUT	PIM 9804	PETERSEN, EUGENE	LATHE	CROSS SLIDE	NUT	98	204
24	DRIP COOLANT SYSTEM	PIM 9804	NOLAN, PETER	MILL	COOLANT	DRIP	98	204
10	COLLET CHUCK	PIM 9804	DOCHTERMAN, WILLIAM	LATHE	COLLET	CHUCK	98	204
6	RIVETTING PRESS	PIM 9806	PETERSEN, BURK	SHOP	RIVET	PRESS	98	206
16	CHUCK LIFTER	PIM 9806	STAIGER, JOHN	LATHE	LIFTER	CHUCK	98	206
11	ODDS AND ENDS	PIM 9806	COLLINS, MARSH	SHOP	TECHNIQUES	GENERAL	98	206
38	SFPM ADAPTER	PIM 9806	HEMMELGARN, KEN	SHOP	SURFACE FEET	ADAPTER	98	206
36	9-20 BENCH LATHE MOTOR (DC)	PIM 9806	CHLAPECKA, RICHARD	LATHE	9-20 DC MOTOR	MODIFICATION	98	206
24	BENDING BRAKE	PIM 9806	MCKNIGHT, JIM	SHOP	BENDING BRAKE	36"	98	206
48	E-MAIL NOTES	PIM 9806	PIERCE, PAUL	SHOP	E-MAIL	ADDRESSES	98	206
33	LATHE-MILL-DRILL	PIM 9806	BROWNE, DONOVAN	LATHE	3-IN-1	REVIEW	98	206
28	NEW VISE	PIM 9806	NOLAN, PETER	MILL	VISE	NEW	98	206
6	GEARED ROTARY TABLE	PIM 9808	COLLINS, MARSH	MILL	ROTARY TABLE	GEARED	98	208
16	LAMP, UNIVERSAL	PIM 9808	J.R. "BILL" REICHART	SHOP	LAMP		98	208
22	THREADING W/UNIMAT	PIM 9808	CLARKE, THEODORE	LATHE	THREADING	UNIMAT	98	208
26	SETTING UP SHOP	PIM 9808	MCFARLANE, BOB	SHOP	SETUP	MOVING	98	208
31	EXPANDING MANDRELS	PIM 9808	DELONG, JAMES	LATHE	MANDRELS	EXPANDING	98	208
34	CIRCLE CUTTING ATTACHMENT	PIM 9808	WARING, LEONARD	SHOP	CUTTING	CIRCLES	98	208
37	THREADING RIFLE BARRELS	PIM 9808	ACKER, STEVE	GUNS	THREADING	BARRELS	98	208
50	SHARPENING CARBIDE DRILLS	PROJECT 7	NETZEL, W.	DRILL	SHARPENING	CARBIDE
84	VARIABLE SPEED D.C. MOTOR	PROJECT 7	EYER, CHARLES	SHOP	D.C. MOTOR	VARIABLE
91	ARBOR PRESS RAM, MODIFIED	PROJECT 7	ANDREWS, ALAN	SHOP	ARBOR PRESS RAM	MODIFIED
89	VARIABLE SPEED (SUPPLEMENT)	PROJECT 7	EYER, CHARLES	SHOP	D.C. MOTOR	VARIABLE
10	FACING ACCURATELY	PROJECT 7	MELTON, L	LATHE	FACING	ACCURATELY
148	CYLINDERS AND PISTONS	PROJECT 7	GENEVRO, G.W.	ENGINE	PISTON/CYLINDER	TECHNIQUE
158	COMPUTERS IN THE SHOP	PROJECT 7	FRIESTAD, ROLAND	CNC	HOME BUILT
173	CONVERT YOUR MILL/DRILL	PROJECT 7	FRIESTAD, ROLAND	CNC	HOME BUILT
8	SCROLL SAWING	PROJECT 7	LAUTARD, GUY	SAW	SCROLL	CUTTING
78	MILL SPINDLE INDICATOR HOLDER	PROJECT 7	RICE, ROY	MILL	INDICATOR	HOLDER
20	STARTING TURNING	PROJECT 7	MASON, A.	LATHE	BEGINNER	COURSE
14	SHAPER, REVIVING	PROJECT 7	SEXTON, T.	SHAPER	REBUILD
37	BUILDING PHIL'S DIVIDING HEAD	PROJECT 7	COLLINS, MARSH	SHOP	DIVIDING HEAD	PHIL'S
35	CUTTING STEEL WITH A CIRCULAR SAW BLADE	PROJECT 7	ACKER, STEVE	MILL	CIRCULAR SAW	CARBIDE
96	EDM, MORE	PROJECT 7	LEWIS, J.	EDM	MORE INFOR
4	TAPERED MATERIAL, CLAMPING IN A VISE	PROJECT 7	HARMON, JOE	SHOP	VISE	TAPERS
73	MILL/DRILL SUPPORT	PROJECT 7	HOLM, PAUL	MILL	M/D SUPPORT
98	SIMPLE TIMER	PROJECT 7	REICHART, BILL	SHOP	TIMER
92	REVERSING SWITCH	PROJECT 7	HALBERT, R. L.	SHOP	REVERSING SWITCH	MOTOR
58	TUMBLER GEAR REVERSAL	PROJECT 7	MYERS, T	LATHE	TUMBLER	REVERSAL
56	UNIMAT HEADSTOCK ADAPTER	PROJECT 7	HUARD, C.	LATHE	UNIMAT	HEADSTOCK
76	CHATTERLESS COUNTERSINKS	PROJECT 7	HEDIN, R. S.	MILL	COUNTERSINK	CHATTERLESS
66	TAILSTOCK DRAWBAR	PROJECT 7	NYMAN, P.	LATHE	DRAWBAR	TAILSTOCK
33	STUCK CHUCKS	PROJECT 7	KRATT, H.J.	LATHE	CHUCK	STUCK
48	ENGINEERING PLASTICS	PROJECT 7	DOWLING, THOMAS W. III	SHOP	MATERIAL	PLASTIC
106	DIE FILER	PROJECT 7	KALB, MELVIN L.	SHOP	DIE FILER
42	TOOLHOLDER, DIAMOND	PROJECT 7	KOUHOUPT, RUDY	LATHE	TOOLHOLDER	"DIAMOND"
62	HANDLE ON LEADSCREW	PROJECT 7	GASCOYNE, J.B.	LATHE	LEADSCREW HANDLE
11	SHORT TAPERS ON A MILL/DRILL	PROJECT 7	THOMAS, S.M.	MILL	TAPERS	CUTTING
99	BEVEL GAGE W/PROTRACTOR	PROJECT 7	WRIGHT, T.	SHOP	BEVEL GAGE	PROTRACTOR
17	DIVIDING ON A LATHE	PROJECT 7	SCHMIDT, J.	LATHE	DIVIDING
93	MACHINIST'S CLOCK	PROJECT 7	REICHART, BILL	HOBBY	CLOCK	MACHINIST'S
114	TITAN .60. BUILDING	PROJECT 7	GENEVRO, G.W.	ENGINE F	AIRPLANE	TITAN .60
28	HOT BLUING STEEL	PROJECT 7	ACKER, STEVE	SHOP	HOT BLUING	STEEL
6	CYLINDRICAL CUTS ON A SHAPER	PROJECT 7	HOIJER, P.J.	SHAPER	TECHNIQUE	CYLINDRICAL
64	TAP DOGS	PROJECT 7	PETTIT, G. A.	LATHE	TAP DOGS
46	TANGENTIAL CUTTING	PROJECT 7	BURKE, DESMOND	LATHE	TECHNIQUE	"DIAMOND"
65	ATLAS TAILSTOCK MODIFICATION	PROJECT 7	JONES, B.	LATHE	TAILSTOCK MOD	ATLAS
191	CONVERT YOUR MILL	PROJECT 7	FRIESTAD, ROLAND	CNC	HOME BUILT
104	BUTT WELDER, SMALL SHOP	PROJECT 7	HABICHER, WOLFGANG F.	SHOP	BUTTWELDER
51	SB MODEL C LATHE, REBUILD	PROJECT 7	GRAHAM, DOUGLAS	LATHE	SB MODEL C	REBUILD
144	STEAM/AIR ENGINE FOR FUN	PROJECT 7	KEREKGYARTO,G.	ENGINE	STEAM/AIR
40	LATHE TIPS	PROJECT 7	STONE & HOFFMAN	LATHE	TECHNIQUE
60	SPINDLE STOP, INTERNAL	PROJECT 7	BLACKMON, B. J.	LATHE	SPINDLE STOP
109	3 PHASE CONVERTERS, MORE ON	PROJECT 7	MATTHYS, ROBERT J.	SHOP	3 PHASE CONVERTER
2	GRINDING WHEEL, BALANCING	PROJECT 7	CHRISTOPHERSON, A. M.	GRINDER	BALANCE
34	DIAMOND DRESSERS, USE THEREOF	PROJECT 7	BOCHERT, JOHN	GRINDER	DRESSERS	DIAMOND
108	INDICATOR STAND	PROJECT 7	BOWER, E.L.	SHOP	INDICATOR STAND
139	WALKING STAFF	PROJECT 7	TITUS, D.	HOBBY	WALKING STAFF	BUILDING
72	REMOTE MILL SWITCH	PROJECT 7	VOSS, C. O.	MILL	SWITCH	REMOTE
18	HEAT TREATMENT PROCESSES	PROJECT 7	GENEVRO, G.W.	SHOP	HEAT TREATMENT
70	TABLE STOP	PROJECT 7	MADISON, J.	MILL	TABLE STOP
218	BUILD YOUR OWN CNC	PROJECT 7	FRIESTAD, ROLAND	CNC	HOME BUILT
18	V-BLOCK DRILL GUIDE	PROJECTS 1	METZE, R.	DRILL	GUIDE
128	DRILL PRESS IMPROVEMENT	PROJECTS 1	ESTY, F.B.	DRILL	IMPROVEMENT
36	DESIGN HINTS-MACHINING	PROJECTS 1	STRASSER, F.	SHOP	MACHINING
58	FACEPLATES & SUCH	PROJECTS 1	LAMARCHE, R.E.	LATHE	FACEPLATE
174	WEDGE ENGINE	PROJECTS 1	CUTLER, R.F.	ENGINE	WEDGE	STEAM
109	TOOLPOST GRINDER	PROJECTS 1	JONES, R.T.	GRINDER	LATHE	TOOLPOST
194	STIRLING ENGINE	PROJECTS 1	MAYES, T.L.	ENGINE	STIRLING	STIRLING
51	CHUCK KEY RETAINER	PROJECTS 1	VAUGHAN, W.B.	DRILL	KEY	RETAINER
124	DRILL GRINDER	PROJECTS 1	HEDIN, R.S.	DRILL	SENSITIVE
80	DIAL FOR TAILSTOCK	PROJECTS 1	GROSJEAN, W.C.	LATHE	TAILSTOCK	DIAL
20	FASTENER(ROLLPIN)	PROJECTS 1	WOOD, G.W.	SHOP	ROLLPIN
114	RAM TAILSTOCK	PROJECTS 1	CLARKE, T.M.	LATHE	TAILSTOCK
118	TAPER ATTACHMENT	PROJECTS 1	METZE, R.	LATHE	TAPER	ATTACHMENT
19	LARGE BORE TUBING	PROJECTS 1	DURLING, H.R.	SHOP	HANDLING	LARGE TUBING
16	END MILL SHARPENING	PROJECTS 1	JOHNSON, W.A.	GRINDER	SHARPENING	MILLS
16	SHARPENING MILLING CUTTERS	PROJECTS 1	JOHNSON, W.A.	MILL	SHARPENING
146	20 TON HYDRAULIC PRESS	PROJECTS 1	JONES, R.T.	SHOP	PRESS	HYDRAULIC
140	HAMMER, NO-BOUNCE	PROJECTS 1	HEDIN, R.S.	SHOP	HAMMER
52	MACHINING SPUR GEARS	PROJECTS 1	KOUHOUPT, RUDY	MILL	GEAR	CUTTING
126	DEPTH STOP	PROJECTS 1	WOOD, G.W.	DRILL	STOP	QUICK
117	LATHE DOG	PROJECTS 1	SCHARPLAZ, J.D.	LATHE	DOG
106	SWARF TRAYS	PROJECTS 1	LAUTARD, GUY	LATHE	TRAY
145	MICROMETER STAND	PROJECTS 1	MCCORMACK, D.	SHOP	STAND	MICROMETER
169	TOOL STORAGE UNITS	PROJECTS 1	ELLIS, ART	SHOP	STORAGE	TOOL
11	FINISHING CASTINGS	PROJECTS 1	ROUBAL, W.T.	FOUNDRY	CASTINGS	FINISHING
158	BORING HEAD	PROJECTS 1	GROSJEAN, W.C.	MILL	BORING	HEAD
130	HOLDDOWN DEVICE	PROJECTS 1	VAUGHAN, W.B.	DRILL	VISE	HOLD-DOWN
50	HOLDDOWN DEVICE	PROJECTS 1	METZE, R.	DRILL	VISE
109	TOOLPOST GRINDER (FOREDOM)	PROJECTS 1	JONES, R.T.	LATHE	GRINDER	TOOLPOST
23	DRILL GUIDE	PROJECTS 1	DEAN, J.	DRILL	GUIDE
92	DIE FILER	PROJECTS 1	HOLEN, D.W.	LATHE	FILER
129	PRECISE TAPPER	PROJECTS 1	BOLANTE, J.	DRILL	TAPPER
142	MACHINE TOOL STANDS	PROJECTS 1	LAUTARD, GUY	MILL	STAND
44	DESIGN HINTS-ASSEMBLY	PROJECTS 1	STRASSER, F.	SHOP	ASSEMBLY
127	DRILL PRESS TABLE	PROJECTS 1	HEDIN, R.S.	DRILL	TABLE
132	DIVIDING ATTACHMENT	PROJECTS 1	KOUHOUPT, RUDY	SHOP	DIVIDING HEAD
158	BORING HEAD	PROJECTS 1	GROSJEAN, W.C.	LATHE	BORING	HEAD
24	BALLS & BULL NOSES	PROJECTS 1	LAUTARD, GUY	LATHE	BALL TURNER	TURNING
21	DIAL INDICATOR CARRIAGE	PROJECTS 1	KWASNIEWSKI, G.A.	LATHE	INDICATOR	CARRIAGE
114	COMPOUND	PROJECTS 1	CLARKE, T.M.	LATHE	COMPOUND
97	FOUR-JAW CHUCK	PROJECTS 1	JOHNSON, P.K.	LATHE	CHUCK
191	CAMERA TRIPOD	PROJECTS 1	LAUTARD, GUY	HOBBY	TRIPOD
50	DRILL CHUCK ADAPTER	PROJECTS 1	WOOD, G.W.	LATHE	CHUCK
2	MILLING ON A DRILL PRESS	PROJECTS 1	KOUHOUPT, RUDY	MILL	TABLE
155	DRAFTING TABLE	PROJECTS 1	HOFFMAN, E.G.	SHOP	DRAFTING	TABLE
142	MACHINE TOOL STANDS	PROJECTS 1	LAUTARD, GUY	LATHE	STAND
100	MILLING ATTACHMENT	PROJECTS 1	PETERKA, W.P.	LATHE	MILLING	ATTACHMENT
68	BORING, FLYCUTTING, ETC.	PROJECTS 1	ROUBAL, W.T.	LATHE	BORING, FLYCUTTING, ETC.
84	RADIUS TURNING	PROJECTS 1	CLARKE, T.M.	LATHE	BALL TURNER	RADIUS
122	ACCESSORY TABLE	PROJECTS 1	METZE, R.	LATHE	STAND
94	ATLAS 6", IMPROVEMENTS	PROJECTS 1	MILSTER, C.	LATHE	ATLAS 6"	IMPROVEMENT
165	TEST INDICATOR	PROJECTS 1	KOUHOUPT, RUDY	SHOP	INDICATOR
110	STEP COLLETS	PROJECTS 1	ROUBAL, W.T.	LATHE	COLLET	STEP
68	BORING, FLYCUTTING, ETC.	PROJECTS 1	ROUBAL, W.T.	MILL	TECHNIQUE
171	INSTRUMENT CASE	PROJECTS 1	VAUGHAN, W.B.	SHOP	CASE
92	DIE FILER	PROJECTS 1	HOLEN, D.W.	SHOP	FILER
8	MACHINEX LATHE, MODIFICATIONS	PROJECTS 1	WELLING, R.	LATHE	MODIFICATIONS	MACHINEX
74	MILLING ATTACHMENT	PROJECTS 1	HEDIN, R.S.	LATHE	MILLING	ATTACHMENT
112	CARRIAGE STOP	PROJECTS 1	GROSJEAN, W.C.	LATHE	CARRIAGE	STOP
19	SIMPLE CHUCKS	PROJECTS 1	PETERKA, W.P.	LATHE	CHUCK
49	GET THINGS IN LINE	PROJECTS 1	DEAN, J.	LATHE	CENTER
7	COOLANT CONSERVATION	PROJECTS 1	VAUGHAN, W.B.	SHOP	CUTTING OIL	CONSERVATION
24	ROTARY TABLE WORK	PROJECTS 2	LAUTARD, GUY	MILL	ROTARY	TABLE
150	ALUMINUM FURNACE	PROJECTS 2	DUCLOS, PHILIP	FOUNDRY	FURNACE	ALUMINUM
56	TOOLPOST GRINDER	PROJECTS 2	DEAN, J.	GRINDER	LATHE	TOOLPOST
114	DRILL GUIDE	PROJECTS 2	DEAN, J.	DRILL	GUIDE
184	LIGHTING	PROJECTS 2	CROW, A.	SHOP	LIGHTING
164	FOUNDRY, HOME	PROJECTS 2	GINGERY, D.	FOUNDRY	GENERAL
58	CHIP SHIELD	PROJECTS 2	BERGER, J.	LATHE	SHIELD
102	SPINDLE STOP. 10-K	PROJECTS 2	BENNETT, N.H.	LATHE	STOP
148	CUTTING GUIDE JIG	PROJECTS 2	PHILLIPS, O.	SHOP	GUIDE	CUTTING
32	ORNAMENTAL SHAPES	PROJECTS 2	MILSTER, C.	LATHE	SHAPES
208	ELECTRIC GUN	PROJECTS 2	METZE, R.	HOBBY	GUN	ELECTRIC
160	END MILL SHARPENING	PROJECTS 2	HEDIN, R.S.	GRINDER	SHARPENING	MILLS
185	V-BLOCK	PROJECTS 2	LAUTARD, GUY	SHOP	V-BLOCK	MAKE-UR-OWN
22	MACHINING THIN DISKS	PROJECTS 2	JOHNSON, D. E.	LATHE	TECHNIQUE	DISKS
98	CARRIAGE OILER	PROJECTS 2	BENNETT, N.H.	LATHE	OILER
180	PARALLELS, ADJUSTABLE	PROJECTS 2	DUCLOS, PHILIP	SHOP	PARALLEL	ADJUSTABLE
83	MAXIMAT V-8, MODIFICATIONS	PROJECTS 2	MARSHALL, D.	LATHE	MODIFICATIONS	MAXIMAT V-8
160	END MILL SHARPENING	PROJECTS 2	HEDIN, R.S.	MILL	SHARPENING
192	SCREWDRIVER GRINDING	PROJECTS 2	PLANK, K.E.	GRINDER	SHARPENING	SCREWDRIVER
64	MILLING MACHINE	PROJECTS 2	SNYDER, J.	LATHE	MILLING	MACHINE
116	ROTARY MILLING TABLE	PROJECTS 2	KADRON, S.F.	MILL	TABLE	ROTARY
48	CENTER & THREADING GAGES	PROJECTS 2	HOFFMAN, E.G.	DRILL	GAGES	THREADING
152	TRAMMEL	PROJECTS 2	LAUTARD, GUY	SHOP	TRAMMEL
52	CUTTING ALUMINUM	PROJECTS 2	LEWIS, J.	LATHE	TOOL	GRINDING
192	SCREWDRIVER GRINDING	PROJECTS 2	PLANK, K.E.	DRILL	SHARPENING	SCREWDRIVER
54	SELF-LOCKING MANDREL	PROJECTS 2	DUCLOS, PHILIP	LATHE	MANDREL
110	DRILL INDEX, LAZY SUSAN	PROJECTS 2	GASCOYNE, J.B.	DRILL	INDEX	5 LEVEL
89	CARRIAGE STOP	PROJECTS 2	JOHNSON, D. E.	LATHE	CARRIAGE	STOP
175	TOOL HOLDER RETAINER	PROJECTS 2	BIDDLE, H.T.	SHOP	TOOLHOLDER	RETAINER
42	WEIGHTY PROBLEM	PROJECTS 2	DAVIDSON, W.	SHOP	MOVING	EQUIPMENT
92	TOOLPOST PROBLEM SOLVER	PROJECTS 2	DEAN, J.	LATHE	TOOLPOST	MODIFICATION
30	SPHERE/HEMISPHERE	PROJECTS 2	DEAN, J.	LATHE	BALL TURNER	RADIUS
36	PITCH DIAMETER	PROJECTS 2	DONDRO, C.	SHOP	THREAD	MEASURING
93	LEADSCREW MICROMETER	PROJECTS 2	MCDERMOTT, J.P.	LATHE	LEADSCREW	MICROMETER
97	DOUBLE CAPACITY	PROJECTS 2	BARBOUR, J.	LATHE	LARGE	WORK
81	CENTER TEST INDICATOR	PROJECTS 2	BROCKARDT, F.	LATHE	CENTER	TESTER
114	V-BLOCKS MADE EASY	PROJECTS 2	DEAN, J.	SHOP	V-BLOCK	MAKE-UR-OWN
62	LARGE STEADYREST	PROJECTS 2	BARBOUR, J.	LATHE	STEADY REST	LARGE
2	RECONDITION A LATHE	PROJECTS 2	BLOOM, H.	LATHE	RECONDITIONING
167	FORMING BRAKE	PROJECTS 2	BARBOUR, J.	SHOP	SHEETMETAL	BRAKE
48	CENTER & THREADING GAGES	PROJECTS 2	HOFFMAN, E.G.	SHOP	GAGE	GENERAL
213	GIMBALED SHIP'S LAMP	PROJECTS 2	GREEN, W.F.	HOBBY	LAMP	SHIP'S
29	CHUCK, ACCURATE 3-JAW	PROJECTS 2	PETERKA, W. P.	LATHE	CHUCK	3 JAW
133	AUTO-FEED (BBQ MOTOR)	PROJECTS 2	REICHART, J.W.	MILL	FEED	AUTOMATIC
176	TOOLMAKER'S CLAMP	PROJECTS 2	LAUTARD, GUY	SHOP	CLAMP	TOOLMAKER'S
38	SQUARE REFERENCES	PROJECTS 2	REISDORF, G.F.	SHOP	SQUARE
23	SWAGE COPPER ELBOW	PROJECTS 2	LAUTARD, GUY	SHOP	SWAGE	ELBOW
108	STORAGE BOX	PROJECTS 2	VAUGHAN, W.B.	DRILL	STORAGE	COLUMN
194	NAPOLEON FIELD GUN	PROJECTS 2	GREEN, W.F.	HOBBY	CANNON	NAPOLEON
136	CLAMPING WORK	PROJECTS 2	TIMM, H.	MILL	CLAMP
114	V-BLOCKS MADE EASY	PROJECTS 2	DEAN, J.	DRILL	V-BLOCKS	MAKE-UR-OWN
188	SLIDING BANDSAW VISE	PROJECTS 2	MERRIFIELD, ED	SAW	VISE	BANDSAW
21	MACHINE TAPPING	PROJECTS 2	ROUBAL, W.T.	DRILL	TAPPING
104	TAPPING TOOL	PROJECTS 2	MASON, H.	DRILL	TAPPER
144	AUTOMATIC PARALLEL	PROJECTS 2	KOUHOUPT, RUDY	SHOP	PARALLEL
26	HOME SHOP PAYS	PROJECTS 2	ODER, J.W.	LATHE	HOME SHOP
128	CHIP SHIELD	PROJECTS 2	BERGER, J.	MILL	SHIELD
140	CONVERT SHAPER	PROJECTS 2	CLARKE, T.M.	SHAPER	HYDRAULIC
99	FACEPLATES	PROJECTS 2	HADLEY, M.	LATHE	FACEPLATE	ADJUSTABLE
82	DRILL HOLDER	PROJECTS 2	PEAVEY, G.A.	LATHE	DRILL	HOLDER
189	PORTABLE VISE BENCH	PROJECTS 2	HUNT. C.K.	SHOP	BENCH	VISE
56	TOOLPOST GRINDER	PROJECTS 2	DEAN, J.	LATHE	GRINDER	TOOLPOST
57	DIE HOLDER	PROJECTS 2	TIMM, H.	LATHE	DIEHOLDER	TAILSTOCK
170	KEYWAY BROACH	PROJECTS 2	DUCLOS, PHILIP	SHOP	BROACH	SLOWPOKE
147	GRINDING WHEEL ARBOR	PROJECTS 2	BERTRAND, J.	SHOP	ARBOR	GRINDING
118	MY SHOP TO YOURS	PROJECTS 3	HOLM, P.J.	LATHE	GRINDER (DREMEL)	TOOLPOST
89	CENTERING GUIDE	PROJECTS 3	OPFER, J.	LATHE	GUIDE	CENTERING
58	RECONDITIONING A LATHE	PROJECTS 3	BLOOM, H.	LATHE	REPAIR
69	JAWS	PROJECTS 3	TORGERSON, R.	LATHE	CHUCK
152	FLY CUTTER, 10"	PROJECTS 3	DUBOSKY, E.	MILL	TOOL
154	EXTEND THE CAPACITY	PROJECTS 3	REISDORF, G.F.	MILL	TABLE
44	MEASURING TAPERS	PROJECTS 3	FELLER, E.T.	LATHE	TAPER	MEASURING
144	SHOPTRONICS DRO	PROJECTS 3	WASHBURN, R.A.	MILL	READOUT
102	WIGGLER AND TEST BAR	PROJECTS 3	HOFFMAN, E.G.	LATHE	GUIDE	WIGGLER
96	SPINDLE WORK STOP	PROJECTS 3	MARX, A.	MILL	STOP
132	THREAD CUTTING STOP	PROJECTS 3	WALKER, R.B.	LATHE	STOP
52	QUICK THREADING	PROJECTS 3	HOFF, M.	LATHE	THREADING
80	SCREWCUTTING THREADS	PROJECTS 3	WRIGHT, T.	LATHE	THREADING
128	THREADING INDICATOR	PROJECTS 3	PETERKA, W. P.	LATHE	THREADING
78	THREAD CUTTING	PROJECTS 3	FELLER, E.T.	LATHE	THREADING
56	INDEXING ON LATHES	PROJECTS 3	ROUBAL, W.T.	LATHE	INDEXING
139	TOOL SETUP GAGE	PROJECTS 3	MCDERMOTT, J.P.	LATHE	TOOL	SETUP
136	DIAL INDICATOR ROD	PROJECTS 3	GASCOYNE, J.B.	LATHE	INDICATOR
125	TAPER ATTACHMENT	PROJECTS 3	BARBOUR, J.	LATHE	TAPER	ATTACHMENT
190	BRASS IS BEAUTIFUL	PROJECTS 3	MARX, A.	MILL	INDICATOR
148	UNIMAT TOOLING	PROJECTS 3	CLARKE, T.M.	LATHE	TOOL	UNIMAT
130	MULTI TOOLPOST 6"	PROJECTS 3	TRAUB, C.A.	LATHE	TOOLPOST
8	AUCTIONS/SALES	PROJECTS 3	WALKER, R.B.	SHOP	AUCTIONS
79	CUTTING A THIN GEAR	PROJECTS 3	DEWBERRY, O.J.	MILL	GEAR	CUTTING
118	MY SHOP TO YOURS	PROJECTS 3	HOLM, P.J.	MILL	FLY CUTTER
66	FACING THIN PIECES	PROJECTS 3	MARX, A.	LATHE	FACEPLATE
149	QUILL FEED	PROJECTS 3	DWORZAN, P.	MILL	DOWN FEED	Z- AXIS
118	MY SHOP TO YOURS	PROJECTS 3	HOLM, P.J.	LATHE	GEAR REPAIR
62	FACTS ON DIAL INDICATORS	PROJECTS 3	SPOKOVICH, R.	SHOP	INDICATOR
106	MULTIPURPOSE BLOCK	PROJECTS 3	JOHNSON, D. E.	LATHE	BLOCK
45	DRILL GRINDER	PROJECTS 3	ROBINSON, T.	DRILL	SHARPENING
160	DRILL ACCURATE HOLES	PROJECTS 3	BENNETT, N.H.	DRILL	TECHNIQUE
92	COLLETS FOR LATHE	PROJECTS 3	REISDORF, G.F.	LATHE	COLLET
164	VISE FOR SMALL PARTS	PROJECTS 3	DUBOSKY, E.	SHOP	VISE
51	CELLULOSE TAPE	PROJECTS 3	BECK, R	SHOP	TAPE
193	40 TON PRESS	PROJECTS 3	JONES, B.	SHOP	PRESS	ARBOR
187	BIT GRINDING BLOCK	PROJECTS 3	JOHNSON, D. E.	GRINDER	SHARPENING	TOOL BIT
162	TWINBEAM TRAMMEL	PROJECTS 3	MARX, A.	SHOP	LAYOUT	TRAMMEL
181	VERNIER HEIGHT GAGE	PROJECTS 3	JENKINS, L.J.	SHOP	GAGE	HEIGHT
182	ROTARY WELD TABLE	PROJECTS 3	FLEMING, J.	SHOP	TABLE	WELDING
172	SCROLL SAW	PROJECTS 3	HEDIN, R.S.	SHOP	SAW	SCROLL
26	WATCH REPAIR	PROJECTS 3	ROUBAL, W.T.	SHOP	WATCHES	REPAIR
171	CENTERING GAGE	PROJECTS 3	NORMAN, R.	SHOP	GAGE	CENTERING
118	TOOLPOST GRINDER	PROJECTS 3	HOLM, P.J.	GRINDER	LATHE	TOOLPOST -DREMEL
118	MY SHOP TO YOURS (FLYCUTTER)	PROJECTS 3	HOLM, P.J.	SHOP	FLYCUTTER
204	MACHINIST'S DESK LAMP	PROJECTS 3	LAUTARD, GUY	HOBBY	LAMP	DESK
170	TABLE COVERS & TRAYS	PROJECTS 3	KINDERMAN, E.	SHOP	COVERS
45	DRILL GRINDER	PROJECTS 3	ROBINSON, T.	GRINDER	SHARPENING	DRILL
46	MOTOR CONNECTIONS	PROJECTS 3	LAMPARTER, R.W.	SHOP	MOTOR	CONNECTIONS
14	HELICAL SPRINGS	PROJECTS 3	HIRAOKA, KOZO	SHOP	SPRINGS
65	SHRINK FITS	PROJECTS 3	DEVOR, D.	SHOP	FITS
2	CRANKS/ECCENTRICS	PROJECTS 3	JENKINS, D.	LATHE	CRANKS
23	ELECTRIC MOTOR PROBLEMS	PROJECTS 3	TURNER, G. A	SHOP	MOTOR	PROBLEMS
85	SOLDERING	PROJECTS 3	HUNT, D.	SHOP	SOLDERING
36	SPACE	PROJECTS 3	DAVIDSON, W.	SHOP	SHOPS
91	ELIMINATING HEADACHES	PROJECTS 3	HOWARD, J.P.	LATHE	COMPOUND
98	AIDS FOR A LATHE	PROJECTS 3	LEWIS, J.	LATHE	AIDS
111	MAKE AN ANGLE PLATE	PROJECTS 3	HANCOCK, C.H.	LATHE	ACCESSORIES	ANGLE PLATE
88	GEAR COVER, ATLAS 6"	PROJECTS 3	LUCHESSA, C.M.	LATHE	ATLAS 6"	COVER
169	DEMAGNETIZER	PROJECTS 3	LONGLEY, F.A.	SHOP	DEMAGNETIZER
96	SPINDLE WORK STOP	PROJECTS 3	MARX, A.	DRILL	STOP
112	COLLET ADAPTER, ATLAS	PROJECTS 3	PARK, W.B.	LATHE	COLLET	ADAPTER
142	CHUCKBOARD	PROJECTS 3	COLEMAN, R.	LATHE	CHUCK
180	BIT GRINDING BLOCK	PROJECTS 3	PETERKA, W.P.	GRINDER	SHARPENING	TOOL BIT
186	DROP CORD CADDY	PROJECTS 3	CROW, A.	SHOP	CORD	CADDY
30	DRILL GRINDER	PROJECTS 3	DREWNIAK, J.A.	GRINDER	SHARPENING	DRILL
74	FLAT BELT DRIVES	PROJECTS 3	OSLISLO, J.E.	SHOP	DRIVES
114	RADIUS TOOL	PROJECTS 3	MARTIN, W.	LATHE	BALL TURNER	RADIUS
30	DRILL GRINDER	PROJECTS 3	DREWNIAK, J.A.	DRILL	SHARPENING
104	UNIMAT CHUCK AND COLLET	PROJECTS 3	ROUBAL, W.T.	LATHE	CHUCK	COLLET
158	SLOW SPEED	PROJECTS 3	COLEMAN, R.	DRILL	SPEED ATTACHMENT
118	MY SHOP TO YOURS (PIPE CENTER)	PROJECTS 3	HOLM, P.J.	LATHE	CENTER	PIPE
101	LATHE CHUCK BACKSTOP	PROJECTS 3	MCDOWELL, T.	LATHE	CHUCK
184	PARTS CLEANER	PROJECTS 3	STARNES, R.E.	SHOP	CLEANER	PARTS
72	BROACHING ON LATHES	PROJECTS 3	JENKINS, D.	LATHE	BROACH
2	RENEWING HALF-NUTS	PROJECTS 4	BLOOM, H.	LATHE	HALF-NUTS	RENEWING
231	SENTINEL	PROJECTS 4	DEHNICKE, D.	ENGINE	GENERATOR	SENTINEL
26	GEAR DRIVEN SHAPERS	PROJECTS 4	REISDORF, G.F.	SHAPER
56	VERTICAL BANDSAW	PROJECTS 4	WASHBURN, R.A.	SAW	USE OF	BANDSAW
123	QUILL DEPTH CONTROL	PROJECTS 4	BODMER, J.A.	MILL	DEPTH
109	ATLAS ACCESSORIES	PROJECTS 4	ERNEST, J.F.	LATHE	TOOL
68	Q-C TOOLHOLDER	PROJECTS 4	SCHROEDER, A.	LATHE	TOOL HOLDER	Q/C
108	FEED LEVER, 10-K	PROJECTS 4	BENNETT, N.H.	LATHE	FEED
78	TOOL/BAR HOLDER	PROJECTS 4	RASNICK, J.W.	LATHE	TOOL HOLDER
11	COLOR OF STEEL	PROJECTS 4	MASSEY, C.R.	SHOP	HEAT TREAT	TEMPERING
36	BUYING USED MACHINES	PROJECTS 4	GRADY, R.	SHOP	AUCTIONS
112	CUT-OFF TOOL, NEW	PROJECTS 4	ESTY, F.B.	LATHE	TOOL	CUT-OFF
12	FOUR STEPS TO CENTER	PROJECTS 4	MELTON, L	LATHE	LOCATING
5	KEYWAYS, INTERNAL	PROJECTS 4	WALKER, R.	LATHE	KEYWAYS
118	TOOL PLATE	PROJECTS 4	VITKOVITS, S.	MILL	ACCESSORIES
146	TORCH CONTOUR GUIDE	PROJECTS 4	LYNCH, C.	SHOP	CUTTING
96	CARRIAGE INDICATOR	PROJECTS 4	GREGG, A,	LATHE	INDICATOR
128	MILL/DRILL STAND	PROJECTS 4	DULLUM, L.J.	DRILL	STAND
14	TWO STEPS TO CENTER	PROJECTS 4	HOLTHAM, J.H.	LATHE	LOCATING
41	REDUCING TAP BREAKAGE	PROJECTS 4	JOHNSON, D. E.	SHOP	TAPPING
116	PROJECTS	PROJECTS 4	RUNGE, W.C.	LATHE	COLLET
17	MACHINE CUTTING SPEEDS	PROJECTS 4	STOKES, F.	LATHE	SPEED	CUTTING
149	DEBURRING TOOL	PROJECTS 4	JONES, B.	SHOP	DEBURR
134	SENSITIVE LEVEL	PROJECTS 4	KELLY, H.	SHOP	LEVEL	MACHINIST
82	MICROMACHINIST	PROJECTS 4	SPROTT, J.	LATHE	TECHNIQUE
40	DIAMOND EFFICIENCY	PROJECTS 4	OGINZ, F.	SHOP	DIAMONDS
23	DRILLING TANGENTS	PROJECTS 4	HASLAM, K.R.	DRILL	TANGENTS
8	ACCURATE FINAL CUT	PROJECTS 4	MELTON, L	LATHE	TECHNIQUE
44	SURFACE GRINDER	PROJECTS 4	WASHBURN, R.A.	GRINDER	SURFACE
195	SMALL MELT FURNACE	PROJECTS 4	ROY, W.	FOUNDRY	FURNACE
28	DIAMOND LAPPING	PROJECTS 4	HESSE, J.	SHOP	LAPPING	DIAMOND
114	SMALL HOLE SAWS	PROJECTS 4	HEDIN, R.S.	DRILL	HOLE SAW
142	PLASTIC DIP POT	PROJECTS 4	ODONDRO, C.	SHOP	DIP POT	PLASTIC
71	LATHE CABINET	PROJECTS 4	WALKER, R.T.	LATHE	STAND	LATHE
201	METAL MELTER	PROJECTS 4	PILZNIENSKI, J.F.	FOUNDRY	FURNACE
94	CENTERMOUNTED DRILL	PROJECTS 4	MCHENRY, R.	LATHE	DRILL
174	PATTERNS AND MOLDING	PROJECTS 4	GINGERY, D.	FOUNDRY	MOULDING	PATTERNS
27	CARBIDE TOOLS	PROJECTS 4	ESTY, F.B.	LATHE	TOOL
32	LARGE HOLE DRILLING	PROJECTS 4	WALKER, R.	DRILL	LARGE HOLES
154	INVESTMENT CASTING	PROJECTS 4	LEWIS, J.	FOUNDRY	INVESTMENT
98	ASSIST FROM THE FORGE	PROJECTS 4	HANCOCK, C.H.	FORGE	FORGING
85	$100 DIGITAL READOUT	PROJECTS 4	HANLEY, D.	LATHE	READOUT
88	METRIC THREADS	PROJECTS 4	LINCOLN, W.A.	LATHE	THREADING	METRIC
103	COMPOUND REST LOCK	PROJECTS 4	MARX, A.	LATHE	REST
21	MEASURING THREADS	PROJECTS 4	CLARKE, T.M.	LATHE	THREADING	MEASURING
17	MACHINE CUTTING SPEEDS	PROJECTS 4	STOKES, F.	MILL	SPEEDS
18	THREADS, INTERNAL	PROJECTS 4	CLARKE, T.M.	LATHE	THREADING	INTERNAL
120	MULTI-STAND	PROJECTS 4	BERTRAND, J.	MILL	STAND
198	PATTERNS, IDENTICAL	PROJECTS 4	LEWIS, J.	FOUNDRY	INVESTMENT
231	SENTINEL	PROJECTS 4	DEHNICKE, D.	HOBBY	SENTINEL	GENERATOR
104	SAFER LATHE	PROJECTS 4	JEDLICK, J.	LATHE	SAFETY
238	OUTBOARD MOTOR BRACKET	PROJECTS 4	GREEN, W.F.	HOBBY	O/B MOTOR	BRACKET
128	MILL/DRILL STAND	PROJECTS 4	DULLUM, L.J.	MILL	STAND
98	ASSIST FROM THE FORGE	PROJECTS 4	HANCOCK, C.H.	SHOP	FORGING
34	GEAR REPAIR	PROJECTS 4	REISDORF, G.F.	SHOP	GEARS	REPAIR
38	SPECIAL BREED	PROJECTS 4	BARBOUR, J.	SHOP	WAR STORIES
64	CARRIAGE MULTISTOP	PROJECTS 4	DUBOSKY, E.	LATHE	STOP
228	KALEIDOSCOPE	PROJECTS 4	LAUTARD, GUY	HOBBY	KALEIDOSCOPE
76	FIXTURE PLATE FOR LATHE OR MILL	PROJECTS 5	STARNES, R.E.	MILL	FIXTURE PLATE
90	RULE GUIDE FOR LAYOUT	PROJECTS 5	HOFFMAN, E.G.	SHOP	RULE GUIDE	LAYOUT
56	DRILLING MULTIPLE HOLES IN LINE	PROJECTS 5	WAGNER, W.S.	SHOP	DRILLING	IN-LINE HOLES
35	OTIS STOPS CHATTER	PROJECTS 5	MELTON, L	SHOP	CHATTER
132	KEEPER OF THE KEY	PROJECTS 5	RICHARDS, D.	DRILL	KEY	KEEPER
49	OTIS MEASURES BACKLASH	PROJECTS 5	MELTON, L	SHOP
17	CHUCK, 4 JAW, REMOUNTING	PROJECTS 5	WADHAM, G	LATHE	CHUCK
130	SMALL T-SLOT NUTS	PROJECTS 5	WILLIAMS, J.D.	MILL	T-SLOT NUTS
139	BAND SAW TRANSMISSION	PROJECTS 5	TORGERSON, R.	SAW	BANDSAW	TRANSMISSION
59	TEETH FOR ROTARY CUTTING TOOLS	PROJECTS 5	HEDIN, R.S.	SHOP	ROTARY CUTTING TOOLS
131	SURFACE GRINDING ON THE DRILL PRESS	PROJECTS 5	STARNES, R.E.	DRILL	SHARPENING
106	INDEXING DEVICE	PROJECTS 5	DUBOSKY, E.	MILL	INDEXER
78	TOPICS IN MICROMACHINING	PROJECTS 5	ROUBAL, W.T.	SHOP	MICROMACHINING
66	STEADY REST	PROJECTS 5	WILSON, G.	LATHE	STEADY REST
129	TAPPING GUIDE FOR UNIMAT	PROJECTS 5	NESSEN, L.	LATHE	UNIMAT
63	DENSITY, VOLUME, DIMENSIONS=WEIGHT	PROJECTS 5	MELTON, L	SHOP	DIMENSIONING
2	LATHE OPERATIONS ON A MILL	PROJECTS 5	THOMAS, S.M.	MILL	LATHE OPERATIONS ON A MILL
150	PULLEY PULLER	PROJECTS 5	WORZALA, J	SHOP	PULLEY PULLER
144	FLAME CUTTER	PROJECTS 5	VERITY, T.	SHOP	FLAME CUTTER
71	STORAGE	PROJECTS 5	VREELAND, D.	SHOP	STORAGE
214	PENDULUM CLOCK	PROJECTS 5	BOUCHERON, PIERRE	HOBBY	CLOCK	PENDULUM
112	ROTARY DRILL PRESS CROSS SLIDE TABLE	PROJECTS 5	GASCOYNE, J.B.	DRILL	ROTARY TABLE
153	SINGLE PHASE CONVERTER	PROJECTS 5	ACKER, STEVE	SHOP	PHASE CONVERTER	ELECTRICAL
128	MILL/DRILL STAND	PROJECTS 5	MULHOLLAND, G.	MILL	STAND
50	LOW RANGE OHMMETERS	PROJECTS 5	MYERS, T	SHOP	OHMMETER	ELECTRICAL
74	FOLLOWER REST	PROJECTS 5	HOLM, P.J.	LATHE	FOLLOWER REST
76	FIXTURE PLATE FOR LATHE OR MILL	PROJECTS 5	STARNES, R.E.	LATHE	FIXTURE
228	TOGGLE CAN CRUSHER	PROJECTS 5	MARUSCHAK, J.	HOBBY	CAN CRUSHER
127	TABLE SQUARE	PROJECTS 5	MADISON, J.	MILL	SQUARE
38	CAST IRON REPAIR	PROJECTS 5	WALKER, R.	SHOP	WELDING	CAST IRON
193	PLASTIC INJECTION MOLDING MACHINE	PROJECTS 5	HANSON, R.	SHOP	MOLDING	PLASTIC
24	STAINLESS STEEL FUNDAMENTALS	PROJECTS 5	GENEVRO, G.W.	SHOP	STAINLESS STEEL
22	ELECTRO DISCHARGE MACHINING	PROJECTS 5	MEADOR, H.	EDM	EDM
54	BLACKSMITH EXTRAORDINAIRE	PROJECTS 5	BARBOUR, J.	FORGE	FORGING
102	SOFT VISE JAWS	PROJECTS 5	MADISON, J.	SHOP	VISE	JAWS
156	UNIVERSAL PILLAR TOOL	PROJECTS 5	MASON, H.	SHOP	PILLAR TOOL
32	MEDICAL TOOLS	PROJECTS 5	MARX, A.	SHOP
72	CARRIAGE STOP	PROJECTS 5	NEILL, I.	LATHE	CARRIAGE	STOP
12	POSHIN' UP A TAIWANESE LATHE	PROJECTS 5	WARREN/LAUTARD	LATHE
44	JUNKYARD MOTOR JUNKIE	PROJECTS 5	MYERS, T	SHOP	MOTOR	ELECTRICAL
134	BENCH BLOCK, HOW TO MAKE	PROJECTS 5	ACKER, STEVE	SHOP	BENCH BLOCK
28	HEAT TREATING BASICS	PROJECTS 5	ACKER, STEVE	SHOP	HEAT TREAT
211	HAMMER, MIRROR FACED	PROJECTS 5	ACKER, STEVE	SHOP	HAMMER	MIRROR FACED
60	DIAL INDICATORS, DTI	PROJECTS 5	GASCOYNE, J.B.	SHOP	INDICATOR	DTI
92	ROTARY TABLE ACCESSORIES	PROJECTS 5	STRAIGHT, J.W.	MILL	ROTARY	TABLE
112	ROTARY DRILL PRESS CROSS SLIDE TABLE	PROJECTS 5	GASCOYNE, J.B.	MILL	ROTARY	TABLE
180	HORIZONTAL MILL VERTICAL ATTACHMENT	PROJECTS 6	SHULL, L.	MILL	VERTICAL	ATTACHMENT
73	VEE NOTCHES	PROJECTS 6	COOPER, J.A.	MILL	TECHNIQUE	V-BLOCKS
232	WATER POT, GRINDER	PROJECTS 6	FELLER, ERNEST T.	GRINDER	WATER POT
156	BORING BAR, LEAD SHOT FILLED	PROJECTS 6	STRAIGHT, J. W.	LATHE	BORING BAR	LEAD FILLED
14	BALL TURNING IN A MILL	PROJECTS 6	BENNETT, N.H.	MILL	TECHNIQUE	BALL TURNING
205	GRIZZLY 8 x 18 LATHE	PROJECTS 6	SCHULTZ. G.	LATHE	MODIFICATIONS	8 x 18
64	THREADING DIALS, METRIC THREADS	PROJECTS 6	PETERSON, E.E.	LATHE	METRIC THREADS	DIALS
157	KNOCKOUT BAR	PROJECTS 6	THOMPSON, J.R.	LATHE	KNOCKOUT	BAR
2	SHORT TAPERS ON A MILL	PROJECTS 6	THOMAS, S.M.	MILL	SHORT TAPERS	TURNING
150	LATHE DRIVE	PROJECTS 6	WADHAM,G.	LATHE	DRIVE	IMPROVED
158	BUSHING, THREADED	PROJECTS 6	THOMPSON, J.R.	LATHE	BUSHING	THREADED
11	IRREGULARLY SHAPED HOLES	PROJECTS 6	ROSCOE, LOWIE	SAW	TECHNIQUE
149	CUTOFF TOOL, SAW BLADE	PROJECTS 6	HUARD, C.	LATHE	CUTOFF	TOOL
76	ALUMINUM FUNDEMENTALS	PROJECTS 6	GENEVRO, G.W.	SHOP	ALUMINUM
114	RADIUS TURNING ATTACHMENT	PROJECTS 6	WILSON, GLENN L.	LATHE	RADIUS	TURNING
94	VACUUM CHIPS	PROJECTS 6	DOUGHERTY, WALT	SHOP	VACUUM	CLEANUP
127	TOOL POST, QUICK CHANGE SYSTEM	PROJECTS 6	TORGERSON, R.	LATHE	TOOLPOST	QUICK CHANGE
86	SELECTING VERTICAL MILLS	PROJECTS 6	HOWARD, T.F.	MILL	SELECTING	VERTICAL
70	REMOVING BROKEN SCREWS & STUDS	PROJECTS 6	HOFFMAN, E.G.	SHOP	TECHNIQUE	THREADS
74	SKIPPING (TRASH BOX HUNTING)	PROJECTS 6	SEXTON, T.	SHOP	TECHNIQUE	TRASHING
176	POWER FEED, INEXPENSIVE	PROJECTS 6	KALB, MELVIN L.	MILL	POWER FEED	TABLE
158	THREAD CUTTING AID	PROJECTS 6	BROWN, K. R.	LATHE	THREAD CUTTING	AID
216	WOOD CARVING MACHINE	PROJECTS 6	SNYDER, J.	SHOP	WOOD CARVING	MAKING
166	CLAMPING DEVICES, ALTERNATE	PROJECTS 6	HOFFMAN, E.G.	MILL	CLAMPS	ALTERNATE
66	KNURLS AND KNURLING	PROJECTS 6	CARVER, ERIC	LATHE	TECHNIQUE	KNURLS
186	BUTTON, TOOLMAKER'S	PROJECTS 6	THOMSON, D. M.	MILL	BUTTON	TOOLMAKER'S
198	MOBILE TOOL TABLE	PROJECTS 6	CARSON, S.W.	SHOP	TABLE	MOBILE
18	STARTING TURNING	PROJECTS 6	MASON, A.	LATHE	TECHNIQUE	BEGINNING
230	MOTOR MOUNT, ELECTRIC MOTOR	PROJECTS 6	WALKER, ROBERT T.	SHOP	MOTOR	MOUNT
227	INDEXING TEMPLATE	PROJECTS 6	HOFFMAN, E.G.	SHOP	LAYOUT	TEMPLATE
234	PHOTOGRAPHY	PROJECTS 6	MARX, A.	SHOP	PHOTOGRAPHY
160	ROTARY TABLE, SIMPLE	PROJECTS 6	HOFF, MICHAEL F. JR.	MILL	ROTARY	TABLE
210	PIN PUNCHES	PROJECTS 6	ACKER, STEVE	SHOP	PIN PUNCHES	MAKING
108	THREAD TOOLING AND WIGGLER	PROJECTS 6	JOHNSON, D. E.	LATHE	THREADING	WIGGLER
98	DRILL PRESS VISE RESTRAINTS	PROJECTS 6	BERGER, J.	DRILL	VISE	RESTRAINTS
8	CHECKERING IN THE MILL	PROJECTS 6	ACKER, STEVE	MILL	CHECKERING
178	SPINDLE LOCK, MILL/DRILL	PROJECTS 6	LOWERY, BILL	MILL	LOCK	SPINDLE
184	FLY CUTTER	PROJECTS 6	FELLER, ERNEST T.	MILL	FLY CUTTER
61	CERROO ALLOYS	PROJECTS 6	MCBRIDE, R.E.	SHOP	TECHNIQUE	WORKHOLDING
17	STEVE MAKES A MISTRAKE	PROJECTS 6	ACKER, STEVE	SHOP	METRIC THREADS	FORMULAE
104	QUILL LOCK, DRILL PRESS	PROJECTS 6	YOUNG, MARSHALL R.	DRILL	LOCK	QUILL
185	ADAPTER FOR BORING HEAD	PROJECTS 6	VREELAND, D.	MILL	ADAPTER	#2 MORSE
95	TAPER TURNING	PROJECTS 6	VREELAND, D.	LATHE	TAPERS	TAILSTOCK
188	HYDRAULIC PRESS	PROJECTS 6	ACKER, STEVE	SHOP	PRESS	HYDRAULIC
12	BASEMENT RUST	PROJECTS 6	AMBROSINO, M. M.	SHOP	TECHNIQUE	RUST
	STIRLING ENGINE, COFFEE CANS	SCIENTIFIC AMERICAN	TAILER, P	ENGINE	STIRLING	COFFEECAN
58	CUTTING SPEEDS	SHOP WISDOM OF	MCLEAN, FRANK	SHOP	GENERAL	SPEEDS
62	DEGASSING MOLTEN ALUMINUM	SHOP WISDOM OF	DUCLOS, PHILIP	FOUNDRY	PROCESS	DEGASSING
49	SLOW POKE SMALL KEYWAY BROACH	SHOP WISDOM OF	DUCLOS, PHILIP	SHOP	KEYWAY	BROACH
2	PLANNING A SMALL SHOP	SHOP WISDOM OF	MCLEAN, FRANK	SHOP	LAYOUT
96	SHARPENING TAPS	SHOP WISDOM OF	MCLEAN, FRANK	GRINDER	SHARPENING	TAP
1	MACHINE SHOP IN A CABINET	SHOP WISDOM OF	KOUHOUPT, RUDY (1)	SHOP	LAYOUT
61	COMPOUND GEAR RATIOS	SHOP WISDOM OF	MCLEAN, FRANK	SHOP	GEARS	COMPOUND
36	SMALL KEYWAYS & KEY SEATS	SHOP WISDOM OF	KOUHOUPT, RUDY (1)	SHOP	KEYWAY
163	SCREW JACKS	SHOP WISDOM OF	MCLEAN, FRANK	SHOP	JACK
104	REAMERS & D-BITS	SHOP WISDOM OF	MCLEAN, FRANK	MILL	REAMERS	D-BITS
60	CHOOSING THE CORRECT SPEED	SHOP WISDOM OF	MCLEAN, FRANK	SHOP	GENERAL	SPEEDS
38	TURNING BETWEEN CENTERS	SHOP WISDOM OF	MCLEAN, FRANK	LATHE	TECHNIQUE
37	TOOLPOST GRINDER	SHOP WISDOM OF	DUCLOS, PHILIP	GRINDER	LATHE	TOOLPOST
61	SIMPLE GEAR RATIOS	SHOP WISDOM OF	MCLEAN, FRANK	SHOP	GEARS	SIMPLE
206	MARKING GAGE	SHOP WISDOM OF	MCLEAN, FRANK	SHOP	GAGE	MARKING
40	TURNING TAPERS	SHOP WISDOM OF	MCLEAN, FRANK	LATHE	TAPER	TURNING
54	MORSE TAPER, TURNING	SHOP WISDOM OF	KOUHOUPT, RUDY (2)	LATHE	TAPER	TURNING
57	TABLE, LATHE, CROSSFEED	SHOP WISDOM OF	KOUHOUPT, RUDY (2)	LATHE	TABLE	CROSSFEED
66	LEVER OPERATED TAILSTOCK	SHOP WISDOM OF	KOUHOUPT, RUDY (1)	LATHE	TAILSTOCK
11	HANDLES FOR TAPS AND REAMERS	SHOP WISDOM OF	KOUHOUPT, RUDY (2)	SHOP	HANDLES	TAP & REAMER
60	RISER FOR VERTICAL MILL	SHOP WISDOM OF	KOUHOUPT, RUDY (2)	MILL	RISER
26	CENTERING SQUARE STOCK	SHOP WISDOM OF	MCLEAN, FRANK	LATHE	TECHNIQUE
64	REPLACING GEAR TEETH	SHOP WISDOM OF	MCLEAN, FRANK	SHOP	GEARS	REPAIR
200	BOBBER, 1" SCALE	SHOP WISDOM OF	KOUHOUPT, RUDY (2)	HOBBY	"BOBBER"	1" SCALE
88	MACHINING THIN PLATES	SHOP WISDOM OF	MCLEAN, FRANK	MILL	PLATES
90	PLATE ENDS	SHOP WISDOM OF	MCLEAN, FRANK	MILL	PLATES
160	MILLING FIXTURE	SHOP WISDOM OF	MCLEAN, FRANK	MILL	RADIUS(LONG)
93	DRAFTING TABLE	SHOP WISDOM OF	KOUHOUPT, RUDY (1)	SHOP	MEASURING	PARALLELS
56	PARALLELS, ADJUSTABLE	SHOP WISDOM OF	DUCLOS, PHILIP	SHOP	MEASURING	PARALLELS
46	DAMAGED DRAWBAR THREADS	SHOP WISDOM OF	MCLEAN, FRANK	LATHE	THREADING
52	EXTERNAL THREADS	SHOP WISDOM OF	MCLEAN, FRANK	LATHE	THREADING	EXTERNAL
47	BORING INTERNAL THREADS	SHOP WISDOM OF	MCLEAN, FRANK	LATHE	THREADING	INTERNAL
60	ALUMINUM FURNACE	SHOP WISDOM OF	DUCLOS, PHILIP	FOUNDRY	FURNACE	ALUMINUM
236	CENTERING GAGE	SHOP WISDOM OF	MCLEAN, FRANK	SHOP	GAGE	CENTER
30	SLITTING SAWS	SHOP WISDOM OF	KOUHOUPT, RUDY (1)	MILL	SLITTING SAW
88	MILLING ON A DRILL PRESS	SHOP WISDOM OF	KOUHOUPT, RUDY (1)	MILL	MILLING ATTACHMENT
204	HEIGHT GAGE, DIGITAL	SHOP WISDOM OF	MCLEAN, FRANK	SHOP	GAGE, DIGITAL	HEIGHT
94	END MILL SHARPENING	SHOP WISDOM OF	MCLEAN, FRANK	GRINDER	SHARPENING	MILLS
202	SURFACE GAGE	SHOP WISDOM OF	MCLEAN, FRANK	SHOP	GAGE	SURFACE
99	STOPS, X AND Y	SHOP WISDOM OF	KOUHOUPT, RUDY (2)	MILL	STOPS	X AND Y
32	FIXED STEADY REST	SHOP WISDOM OF	KOUHOUPT, RUDY (1)	LATHE	STEADY REST
34	END MILL SHARPENING	SHOP WISDOM OF	KOUHOUPT, RUDY (2)	MILL	SHARPENING	ENDMILL
164	REVERSING UPRIGHT ENGINE	SHOP WISDOM OF	KOUHOUPT, RUDY (1)	ENGINE	STEAM	UPRIGHT
63	ACCESSORIES, MILLING	SHOP WISDOM OF	KOUHOUPT, RUDY (2)	MILL	TABLE/TOOLHOLDER
4	TEST INDICATOR	SHOP WISDOM OF	KOUHOUPT, RUDY (1)	SHOP	INDICATOR
68	GIVE METAL SPINNING A WHIRL	SHOP WISDOM OF	DUCLOS, PHILIP	LATHE	SPINNING
208	SURFACE GAGE	SHOP WISDOM OF	MCLEAN, FRANK	SHOP	GAGE	SURFACE
112	LATHE ACCESSORIES	SHOP WISDOM OF	MCLEAN, FRANK	LATHE	ACCESSORIES
50	FLY CUTTER AND ANGLE PLATE	SHOP WISDOM OF	KOUHOUPT, RUDY (1)	LATHE	ACCESSORIES	ANGLE PLATE
43	TAILSTOCK ALIGNMENT	SHOP WISDOM OF	MCLEAN, FRANK	LATHE	TAILSTOCK	ALIGNMENT
24	FLOATING END MILL SHARPENER	SHOP WISDOM OF	DUCLOS, PHILIP	MILL	SHARPENING
42	ROTARY TABLE	SHOP WISDOM OF	KOUHOUPT, RUDY (1)	MILL	ROTARY	TABLE
24	FIRESIDE CHAT ABOUT LATHES	SHOP WISDOM OF	MCLEAN, FRANK	LATHE	TECHNIQUE	GENERAL
132	MICROMETER STOP NUT	SHOP WISDOM OF	MCLEAN, FRANK	LATHE	STOP
124	ROLLER TOOL FOR LATHES	SHOP WISDOM OF	MCLEAN, FRANK	LATHE	ROLLER TOOL
92	LAYOUT WITH A HEIGHT GAGE	SHOP WISDOM OF	MCLEAN, FRANK	SHOP	GAGE	HEIGHT
59	TIME FOR AN OVERHAUL	SHOP WISDOM OF	KOUHOUPT, RUDY (1)	LATHE	REPAIR
80	DIVIDING ATTACHMENT	SHOP WISDOM OF	KOUHOUPT, RUDY (1)	SHOP	DIVIDING HEAD
28	GRINDING REST	SHOP WISDOM OF	KOUHOUPT, RUDY (2)	GRINDER	REST
131	PANTOGRAPH, ENGRAVING	SHOP WISDOM OF	KOUHOUPT, RUDY (2)	SHOP	PANTOGRAPH
108	LATHE STANDS	SHOP WISDOM OF	MCLEAN, FRANK	LATHE	BENCH
140	THREAD CUTTING	SHOP WISDOM OF	KOUHOUPT, RUDY (2)	LATHE	THREADS	CUTTING
128	BASEPLATE/DIVIDING HEAD	SHOP WISDOM OF	MCLEAN, FRANK	SHOP	DIVIDING HEAD
142	ROTARY TABLE, NEW	SHOP WISDOM OF	MCLEAN, FRANK	MILL	ROTARY	TABLE
14	DRILL GRINDER	SHOP WISDOM OF	MCLEAN, FRANK	GRINDER	SHARPENING	DRILL
2	DIVIDING HEAD	SHOP WISDOM OF	DUCLOS, PHILIP	SHOP	DIVIDING HEAD
94	SHARPENING END MILLS	SHOP WISDOM OF	MCLEAN, FRANK	MILL	SHARPENING
122	VISE, ACCURATE, MILLING	SHOP WISDOM OF	KOUHOUPT, RUDY (2)	MILL	VISE	ACCURATE
14	BORING BARS	SHOP WISDOM OF	KOUHOUPT, RUDY (1)	LATHE	BORING BAR	BARS
80	POWER FEED FOR MILL/DRILL	SHOP WISDOM OF	MCLEAN, FRANK	MILL	POWER FEED	INSTALLATION
83	MILLING KEYWAYS	SHOP WISDOM OF	MCLEAN, FRANK	MILL	KEYWAYS
121	LATHE END MILL ADAPTERS	SHOP WISDOM OF	MCLEAN, FRANK	LATHE	MILLING	MILL ADAPTER
67	MILLING ON LATHES	SHOP WISDOM OF	MCLEAN, FRANK	LATHE	MILLING
30	LATHE TOOLS	SHOP WISDOM OF	MCLEAN, FRANK	LATHE	TOOL
54	SELF-LOCKING STUB MANDREL	SHOP WISDOM OF	DUCLOS, PHILIP	LATHE	MANDREL
91	BUSHINGS, BRONZE	SHOP WISDOM OF	MCLEAN, FRANK	LATHE	BUSHINGS
198	RIVET/SCREW CUTTER	SHOP WISDOM OF	MCLEAN, FRANK	SHOP	CUTTING
90	BANDSAW BASE	SHOP WISDOM OF	KOUHOUPT, RUDY (2)	SAW	BANDSAW	BASE
216	DEPTH GAGE ATTACHMENT	SHOP WISDOM OF	MCLEAN, FRANK	SHOP	GAGE	DEPTH
25	CATCH PLATE, MAKING	SHOP WISDOM OF	KOUHOUPT, RUDY (2)	LATHE	CATCHPLATE
37	LEVELING THE LATHE	SHOP WISDOM OF	MCLEAN, FRANK	LATHE	LEVELING
66	TIPS ON KNURLING	SHOP WISDOM OF	MCLEAN, FRANK	LATHE	KNURLING
93	CENTER FINDER	SHOP WISDOM OF	KOUHOUPT, RUDY (2)	LATHE	CENTERFINDER
62	TAPPING LARGE PULLEYS	SHOP WISDOM OF	MCLEAN, FRANK	SHOP	PULLEYS
58	PULLEY CALCULATIONS	SHOP WISDOM OF	MCLEAN, FRANK	SHOP	PULLEYS
59	COMPOUND PULLEY RATIOS	SHOP WISDOM OF	MCLEAN, FRANK	SHOP	PULLEYS
16	TOOLS FOR TOOLPOST USE	SHOP WISDOM OF	KOUHOUPT, RUDY (2)	LATHE	TOOLING	TOOLPOST USE
27	LATHE CHUCKS	SHOP WISDOM OF	MCLEAN, FRANK	LATHE	CHUCK
87	PROTECT YOUR MILL	SHOP WISDOM OF	MCLEAN, FRANK	MILL	GENERAL
70	VERTICAL MILL, NEW	SHOP WISDOM OF	MCLEAN, FRANK	MILL	GENERAL
76	VERTICAL MILL IMPROVEMENTS	SHOP WISDOM OF	MCLEAN, FRANK	MILL	GENERAL
178	POWER HACKSAW	SHOP WISDOM OF	MCLEAN, FRANK	SAW	HACKSAW
192	HACKSAW TABLE	SHOP WISDOM OF	MCLEAN, FRANK	SAW	HACKSAW	TABLE
96	TOOLPOST, OPENSIDED	SHOP WISDOM OF	KOUHOUPT, RUDY (2)	LATHE	TOOLPOST	OPENSIDED
74	MACHINING YOUR OWN GEARS	SHOP WISDOM OF	KOUHOUPT, RUDY (1)	MILL	GEAR	CUTTING
223	BAND SAW SPEED REDUCER	SHOP WISDOM OF	MCLEAN, FRANK	SAW	SPEED REDUCER
200	CLAMP, PARALLEL	SHOP WISDOM OF	MCLEAN, FRANK	SHOP	CLAMP
194	FORE AND AFT COMPOUND	SHOP WISDOM OF	KOUHOUPT, RUDY (1)	ENGINE	STEAM	FORE & AFT
50	FLY CUTTER AND ANGLE PLATE	SHOP WISDOM OF	KOUHOUPT, RUDY (1)	MILL	FLY CUTTER
34	END MILL SHARPENING	SHOP WISDOM OF	KOUHOUPT, RUDY (2)	GRINDER	SHARPENING	ENDMILL
24	END MILL SHARPENING	SHOP WISDOM OF	DUCLOS, PHILIP	GRINDER	SHARPENING	MILLS
25	STOCKING STUFFERS	SHOP WISDOM OF	KOUHOUPT, RUDY (1)	HOBBY	GIFTS
44	COLLET ADAPTER	SHOP WISDOM OF	DUCLOS, PHILIP	LATHE	COLLET	CHUCK
64	FLY CUTTER, 10"	SHOP WISDOM OF	DUCLOS, PHILIP	MILL	FLY CUTTER
84	CUTTING LEFTHAND THREADS	SHOP WISDOM OF	MCLEAN, FRANK	LATHE	THREADING	LEFTHAND
218	RUNNING ON AIR	SHOP WISDOM OF	KOUHOUPT, RUDY (2)	HOBBY	MANIFOLD	AIR
112	MODEL PISTON RINGS	SHOP WISDOM OF	DUCLOS, PHILIP	ENGINE	PISTON RINGS
215	CHIP CATCHER/SHAPER	SHOP WISDOM OF	MCLEAN, FRANK	SHAPER	CHIP CATCHER
111	MINI SHAPER	SHOP WISDOM OF	KOUHOUPT, RUDY (2)	SHAPER	OLD IRON
150	OSCILLATING CYLINDER ENGINE	SHOP WISDOM OF	KOUHOUPT, RUDY (2)	ENGINE	OSCILLATING
79	SILVER SOLDERING	SHOP WISDOM OF	MCLEAN, FRANK	SHOP	SOLDERING
74	TOOLPOST GRINDER, BUILD/USE	SHOP WISDOM OF	KOUHOUPT, RUDY (2)	LATHE	GRINDER	TOOLPOST
175	HUFF 'N PUFF ENGINE	SHOP WISDOM OF	DUCLOS, PHILIP	ENGINE	HUFF 'N PUFF	BREATH
66	SHOWPIECE CHALLENGE	SHOP WISDOM OF	DUCLOS, PHILIP	HOBBY	VISE	PROJECT
37	UNORTHODOX MILL/LATHE GRINDER	SHOP WISDOM OF	DUCLOS, PHILIP	LATHE	GRINDER
174	HOT AIR ENGINE	SHOP WISDOM OF	KOUHOUPT, RUDY (2)	ENGINE	HOT AIR	AIRCOOLED
124	WHATZIT	SHOP WISDOM OF	DUCLOS, PHILIP	ENGINE	HIT 'N MISS AM	GAS
42	FACE MILL	SHOP WISDOM OF	KOUHOUPT, RUDY (2)	MILL	FACE	BUILDING
108	SMALLEST "HIT'N MISS" GAS	SHOP WISDOM OF	DUCLOS, PHILIP	ENGINE	HIT 'N MISS AL	GAS
80	ODDS'N ENDS HIT'N MISS	SHOP WISDOM OF	DUCLOS, PHILIP	ENGINE	HIT 'N MISS AK	GAS
44	REPAIRING OLD LATHES	SHOP WISDOM OF	MCLEAN, FRANK	LATHE	GENERAL
141	SIX-CYCLE ODDBALL	SHOP WISDOM OF	DUCLOS, PHILIP	ENGINE	HIT 'N MISS AJ	GAS 6 CYCLE
100	BROACHING SQUARE HOLES	SHOP WISDOM OF	MCLEAN, FRANK	SHOP	BROACH
45	TOOLHOLDER, CUTOFF	SHOP WISDOM OF	KOUHOUPT, RUDY (2)	LATHE	CUTOFF	TOOLHOLDER
115	CURVED SPOKE FLYWHEEL	SHOP WISDOM OF	DUCLOS, PHILIP	ENGINE	FLYWHEEL	CURVED
48	CUTOFF TOOL, USING	SHOP WISDOM OF	KOUHOUPT, RUDY (2)	LATHE	CUTOFF	USING
188	FIRE EATER ENGINE	SHOP WISDOM OF	DUCLOS, PHILIP	ENGINE	FIRE EATER	HEAT
122	TAILSTOCK DIE HOLDERS	SHOP WISDOM OF	MCLEAN, FRANK	LATHE	DIE HOLDER
18	MILLING ACCESSORIES	SHOP WISDOM OF	KOUHOUPT, RUDY (1)	MILL	ACCESSORIES
158	BAKER FAN	SHOP WISDOM OF	KOUHOUPT, RUDY (1)	ENGINE	BAKER FAN	FAN
131	LIGHTING THE MILL	SHOP WISDOM OF	MCLEAN, FRANK	MILL	LIGHTING
166	SHELL MILL ARBOR	SHOP WISDOM OF	MCLEAN, FRANK	MILL	ARBOR
102	BORING HEAD, COMPACT	SHOP WISDOM OF	KOUHOUPT, RUDY (2)	MILL	BORING HEAD	COMPACT
8	COMPRESSED AIR MOTOR	SHOP WISDOM OF	KOUHOUPT, RUDY (1)	ENGINE	AIR	AIR
98	STEAM ENGINE	SHOP WISDOM OF	KOUHOUPT, RUDY (1)	ENGINE	STEAM	STEAM
136	HUMBLE ANGLE PLATE	SHOP WISDOM OF	MCLEAN, FRANK	SHOP	ANGLE PLATE
104	HORIZONTAL STATIONARY ENGINE	SHOP WISDOM OF	KOUHOUPT, RUDY (1)	ENGINE	STEAM	STATIONARY
174	SPECIAL TAP	SHOP WISDOM OF	MCLEAN, FRANK	SHOP	TAP
70	LATHE ALIGNMENT	SHOP WISDOM OF	KOUHOUPT, RUDY (2)	LATHE	ALIGNMENT	CHECKING
80	DIVIDING ATTACHMENT	SHOP WISDOM OF	KOUHOUPT, RUDY (1)	MILL	DIVIDING HEAD
194	RAIL BENDER	SHOP WISDOM OF	MCLEAN, FRANK	SHOP	BENDER
2	VERTICAL MILL TOOLING	SHOP WISDOM OF	KOUHOUPT, RUDY (2)	MILL	TOOLING
22	CLAMPS, MILLING	SHOP WISDOM OF	KOUHOUPT, RUDY (2)	MILL	CLAMPS
197	GRINDING BENCH	SHOP WISDOM OF	MCLEAN, FRANK	SHOP	BENCH
129	OVERCRANK ENGINE	SHOP WISDOM OF	KOUHOUPT, RUDY (1)	ENGINE	STEAM	OVERCRANK
170	WORKBENCH	SHOP WISDOM OF	MCLEAN, FRANK	SHOP	BENCH
53	MICROMETER FACEPLATE ATTACHMENT	SHOP WISDOM OF	KOUHOUPT, RUDY (1)	LATHE	FACEPLATE
12	CHAIN DRILLING FRAMES	SHOP WISDOM OF	MCLEAN, FRANK	DRILL	TECHNIQUE
154	FLY CUTTERS & ARBORS	SHOP WISDOM OF	MCLEAN, FRANK	MILL	CUTTER
8	DRILLING CENTER HOLES IN SHAFTS	SHOP WISDOM OF	MCLEAN, FRANK	DRILL	TECHNIQUE
7	DRILLING CENTER HOLES ACCURATELY	SHOP WISDOM OF	MCLEAN, FRANK	DRILL	TECHNIQUE
66	LATHE DOGS	SHOP WISDOM OF	KOUHOUPT, RUDY (2)	LATHE	DOGS
10	DRILLING ON A DRILL PRESS OR MILL	SHOP WISDOM OF	MCLEAN, FRANK	DRILL	TECHNIQUE
5	DRILLING AND TAPPING HINTS	SHOP WISDOM OF	MCLEAN, FRANK	DRILL	TAPPING
150	HOLLOW MILL	SHOP WISDOM OF	MCLEAN, FRANK	MILL	CUTTER
6	TAP DRILL SIZE	SHOP WISDOM OF	MCLEAN, FRANK	DRILL	TAPPING
145	MILLING CUTTERS, HOMEMADE	SHOP WISDOM OF	MCLEAN, FRANK	MILL	CUTTER
152	CARBIDE END MILL	SHOP WISDOM OF	MCLEAN, FRANK	MILL	CUTTER
97	REMOVE BALL BEARINGS	SHOP WISDOM OF	MCLEAN, FRANK	SHOP	BALLBEARINGS
86	MILLING END CURVES	SHOP WISDOM OF	KOUHOUPT, RUDY (2)	MILL	CURVE MILLING
104	REAMERS & D-BITS	SHOP WISDOM OF	MCLEAN, FRANK	DRILL	REAMERS
88	MILLING ON A DRILL PRESS	SHOP WISDOM OF	KOUHOUPT, RUDY (1)	DRILL	MILLING ATTACHMENT
104	REAMERS & D-BITS	SHOP WISDOM OF	MCLEAN, FRANK	DRILL	REAMERS	D-BITS
51	HANDLES,DRILL PRESS CHUCK	SHOP WISDOM OF	KOUHOUPT, RUDY (2)	DRILL	HANDLES	CHUCK
102	DRILLS, HOMEMADE	SHOP WISDOM OF	MCLEAN, FRANK	DRILL	HOMEMADE
220	MACHINE VISE	SHOP WISDOM OF	MCLEAN, FRANK	SHOP	VISE
28	USE OF DIMENSIONS	SHOP WISDOM OF	KOUHOUPT, RUDY (1)	SHOP	DIMENSIONS
130	FINGER STOP/VISE	SHOP WISDOM OF	MCLEAN, FRANK	SHOP	VISE
218	FLAT VISE	SHOP WISDOM OF	MCLEAN, FRANK	SHOP	VISE
14	DRILL GRINDER	SHOP WISDOM OF	MCLEAN, FRANK	DRILL	SHARPENING
98	VISE IMPROVEMENTS	SHOP WISDOM OF	MCLEAN, FRANK	SHOP	VISE
126	WIGGLER	SHOP WISDOM OF	MCLEAN, FRANK	SHOP	WIGGLER
106	SHEET METAL DRILLS	SHOP WISDOM OF	MCLEAN, FRANK	DRILL	SHEET METAL	DRILLS
177	TRANSFER SCREWS	SHOP WISDOM OF	MCLEAN, FRANK	SHOP	TRANSFER
17	DRILL PRESSES AND GRINDERS	SHOP WISDOM OF	MCLEAN, FRANK	DRILL	GENERAL
12	PRELUDE TO MARINE ENGINE	STEAM ST #1	FARMER, WESTON	ENGINE	STEAM	MARINE
11	MARINE ENGINE, 1/2 HP	STEAM ST #1	GREENLY, HENRY	ENGINE	STEAM	MARINE
105	BOILER WORKS, MINIATURE	STEAM ST #1	GUNNARSSON, JAN	ENGINE	STEAM	BOILER
40	VARIATION OF STEAM ENGINES	STEAM ST #1	SLACK, GARY R.	ENGINE	STEAM	COMMENTS
41	BIJOU STEAM ENGINE 1/8" BORE X 1/8" S	STEAM ST #1	SENFT, JAMES R.	ENGINE	STEAM	OSCILLATING
86	V4 ENGINE, 10MM BORE X 20MM STROKE	STEAM ST #1	GUNNARSSON, JAN	ENGINE	STEAM	OSCILLATING
54	MINIKIN, 1/4" BORE X 1/4" STROKE	STEAM ST #1	SENFT, JAMES R.	ENGINE	STEAM	OSCILLATING
36	STEAM ENGINE, HAND TOOL	STEAM ST #1	SPRAGUE, ANDY	ENGINE	STEAM	HAND TOOL
45	THIMBLE POWER PLANT, 1/16" BORE x 1/16" STROKE	STEAM ST #1	SENFT, JAMES R.	ENGINE	STEAM	OSCILLATING
59	STEAM ENGINE, OPPOSED PISTON	STEAM ST #1	VERBURG, ELMER	ENGINE	STEAM	OPPOSED PISTON
64	RIDER-ERICSSON, 1/4 SCALE HOT AIR PUMP	STEAM ST #1	KAZYAK, LARRY	ENGINE	HOT AIR	RIDER-ERICSSON
159	SUPPLIERS	STEAM ST #1	EDITOR	ENGINE	SUPPLIERS	KITS
30	STEAM TURBINE	STEAM ST #1	HOBSON, DALE	ENGINE	STEAM	TURBINE
39	METRICS	STEAM ST #1	FITT, WILLIAM C.	SHOP	METRICS	COMMENTS
158	DRILL SIZES, REGULAR	STEAM ST #1	FITT, WILLIAM C.	DRILL	BIT SIZES	REGULAR
22	MORIYA (POWERED FAN)	STEAM ST #1	SENFT, JAMES R.	ENGINE	STIRLING	FAN
146	MILLIMETER-DECIMAL CONVERSIONS	STEAM ST #1	KOEHL, LARRY	SHOP	METRICS	CONVERSION
1	STEAM PLANT, STATIONARY	STEAM ST #1	BLACK, W. MARSHALL	ENGINE	STEAM PLANT	STATIONARY
6	STEAM ENGINE, UNUSUAL	STEAM ST #1	HEDIN, R.S.	ENGINE	STEAM	UNUSUAL
192	PROPANE, USE AND STORAGE	STEAM ST #2	LEGGO, CHRISTOPHER	SHOP	PROPANE	USE OF
91	SPEEDER FROM PARTS	STEAM ST #2	SPRAGUE, ANDY	ENGINE	STEAM	SPEEDER
80	STEAM ENGINE, .75" BORE X 3/4" STROKE	STEAM ST #2	HODGSON, SAMUEL K.	ENGINE	STEAM	OSCILLATING
112	STEAM ENGINE. "MYSTERY"	STEAM ST #2	TEAGUE, ARNOLD	ENGINE	STEAM	TOY
51	STEAM ENGINE, MARINE	STEAM ST #2	MITCHELL, RICHARD M.	ENGINE	STEAM	TOY
44	STEAM ENGINE, SIMPLEX, DUPLEX	STEAM ST #2	VAN DORT, ROB	ENGINE	STEAM	DUPLEX
98	TESLA TURBINE	STEAM ST #2	HEDIN, R.S.	ENGINE	STEAM	TURBINE
50	STEAM ENGINE, REVERSING DUPLEX	STEAM ST #2	LYMAN, JIM	ENGINE	STEAM	DUPLEX
84	STEAM ENGINE, .375" BORE X 1" STROKE	STEAM ST #2	BLACK, W. MARSHALL	ENGINE	STEAM	BEAM
66	STEAM ENGINE, .625" BORE X 3/4" STROKE	STEAM ST #2	JACOBS, PAUL	ENGINE	STEAM	MILL
6	HEX HEAD SCREWS AND NUTS	STEAM ST #2	CROFT, DAVID	SHOP	SCREWS AND NUTS	HEX HEAD
2	STEAM ENGINE, .75" BORE X 3/4" STROKE	STEAM ST #2	CROFT, DAVID	ENGINE	STEAM	SIMPLE
42	STEAM ENGINE, SIMPLE	STEAM ST #2	AHO, JOHN A.	ENGINE	STEAM	SIMPLE
102	STEAM ENGINE, 1" BORE X 1" STROKE	STEAM ST #2	JACOBS, PAUL	ENGINE	STEAM	MILL
164	STIRLING ENGINE	STEAM ST #2	COLIN, RAY J.	ENGINE	STIRLING
213	LUBRICATOR, SEE THROUGH, DISPLACEMENT	STEAM ST #2	ROUBAL, W.T.	ENGINE	STEAM	LUBRICATOR
167	STIRLING ENGINE, SIMPLE	STEAM ST #2	KRAEMER, T.	ENGINE	STIRLING	SIMPLE
114	STEAM ENGINE. "WOODY"	STEAM ST #2	REICHART, J.W.	ENGINE	AIR	WOODEN
221	ALCOHOL BURNER	STEAM ST #2	SPRAGUE, ANDY	ENGINE	ALCOHOL BURNER	SIMPLE
148	ATMOSPHERIC ENGINE, "FIRE EATER"	STEAM ST #2	DUCLOS, PHILIP	ENGINE	ATMOSPHERIC	FIRE EATER
219	WOOD FLYWHEELS	STEAM ST #2	DRAYSON, D. A.	ENGINE	FLYWHEELS	WOODEN
206	STIRLING ENGINE WORK	STEAM ST #2	ROSS, ANDREW	ENGINE	STIRLING CYCLE	USES
26	ENGINE, HULA-HULA, STEAM	STEAM ST #2	DUCLOS, PHILIP	ENGINE	STEAM	RADIAL
216	FLYWHEEL TAPERED BUSHING	STEAM ST #2	JOHNSON, ROBERT	ENGINE	TAPERED BUSHING	FLYWHEEL
23	ENGINE, ROOT'S	STEAM ST #2	HEDIN, R.S.	ENGINE	STEAM	ROOT'S
120	DUPLEX PUMP	STEAM ST #2	MAIER, JEFFREY C.	HOBBY	STEAM PUMP	DUPLEX
144	STEAMROLLER	STEAM ST #2	SPRAGUE, ANDY	HOBBY	STEAMROLLER	SIMPLE
97	SPEEDER UPDATE	STEAM ST #2	SPRAGUE, ANDY	ENGINE	STEAM	SPEEDER
174	BOILER, AUTOMATIC ELECTRIC	STEAM ST #2	JOHNSON, D. E.	BOILER	ELECTRIC	AUTOMATIC
186	BOILER HEAD, COPPER, ROLL FORMING	STEAM ST #2	JOHNSON, D. E.	BOILER	ROLL FORMING	COPPER HEADS
3	CUTTING GEARS WITH A HOB	STRICTLY I/C AUG 94	LOOP, F.E.	MILL	CUTTING GEARS	CUTTING-HOB	94	VOL7,40

Last Updated on 9/4/1998
By Scott S. Logan
Email: ssl@loganact.com